CBQ.init/tc - sharing bandwidth "nicely"
Hello,
I'm starting to toy with CBQ.init and was wondering if someone would take the time to answer a few of my questions.
First my setup:
LAN
|[FW/router]----ISDN to NET
|
DMZI'm experimenting with shaping the trafic between the NET and the LAN. I've got two classes defined as follows:
cbq-10.net-lan---------------
DEVICE=eth0,10Mbit,1Mbit
RATE�Kbit
WEIGHT=8Kbit
PRIO=5
BOUNDED=yes
RULE2.17.1.0/24
and
cbq-20.net-lan---------------
DEVICE=aps0,128Kbit,12Kbit
RATE�Kbit
WEIGHT=8Kbit
PRIO=5
BOUNDED=yes
RULE2.17.1.0/24,
The shaping seems to be working as advertized, but I'm not entirely satisfied with the behavior. And it's not clear to me what to do to get what I want. (which is the reason for the post) Let me explain.
With the above in place, traffic from the internet to the 172.x.x.x network is limited to somewhere around 10Kbytes/s. But say I start downloading a big file off the net from a client on the lan. This fills up the available bandwidth, and everything else comes to a grinding halt (very very slow), including any shell connections to the Firewall/router.
What I'd like is for all clients on the lan to share (nicely) a given amount of bandwidth, devided equally among all using it. Also, I'd rather not penalize connections directly to/from the Firewall/router, although I suspect that fixing this is simply a matter of putting some better rules in place.
Comments/suggestions are very much appreciated.
-Andrew
Signature · 8 lines
Computer Systems Admin. Bibleinfo.com PO Box 19039 Spokane, WA 99219 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/