Skip to contentSkip to conversation

Contents of LARTC digest, Vol 1 #282 - 4 msgs

LARTC David 1 participant 1 message Oct 1, 2001

lore
Share & tools
lore

David

author
#0 lore raw

As far as I know, the cable modems each share the same bandwidth. They would also share the same subnet, so if one link goes down, wouldn't they both be down? I can't see using more than 1 modem for each coaxial line.

Chris.

Quoted 10 lines · David

Here is the setup I have. I have 3 network cards in my linux machine. 1 network card (eth0) goes to my internet network (192.168.0.0). Network Card 2 (eth1) and Network Card 3(eth2) go to the internet via 2 cable modems whose address is determined by dhcp. I can get either cable modem to work alone but I can't get them to work together. I would really like to be able to combine the 2 into 1 and have it detect a bad link as well in case i have to unplug 1 cable modem.

Quoted 7 lines

Thanks!

David
[email protected]

I am using 2 different cable modems because there are 2 different people paying of them. The way our cable system is set up is that 2 separate cable modems combined together ($50 each) will be faster than the cable company's $100 package. And yes, they would both go down at the same time. But for future reference, it would be nice if I could have it detect when 1 goes down (like unplugging it) because later I will be combining a DSL and a cable. Im trying to get this teql thing (tc qdisc,etc.) to work but now that Im reading about it seems like I would have to access to both sides.

Thanks
David
[email protected]