Policy based routing form SRC Mac address.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
If I understood your question correctly, I'd suggest you use iptables instead of routing etc. Set up a firewall which prohibits some traffic depending on MAC source while it allows others.
Ie, set up the rules which allows traffic with iptables in a way like this:
iptables -A FORWARD -s 192.168.1.0/26 -j ACCEPT
iptables -A FORWARD -s 192.168.1.64/26 -d 10.1.1.1/32 -j ACCEPT # what kind of access?
etc, and then set up a policy of DROP on the FORWARD chain.
For more on this, check out the howtos and tutorials etc on
http://netfilter.samba.org/.
Have a nice day,
Quoted 28 lines · bharat merja
Hi,
Thanks to all in advance,
In recent I need policy based routing on my Linux2.4.3 box. requirement is like to give access of Internet to some computers while this facility is not available to rest people (That is based on MAC address only).
My existin routing in "table main" is...
192.168.1.0/26 dev eth0 proto kernel scope link src 192.168.1.3 192.168.1.64/26 dev eth1 proto kernel scope link src 192.168.1.65 192.168.2.0/24 via 192.168.1.2 dev eth0
127.0.0.0/8 dev lo scope link
default via 192.168.1.1 dev eth0Where 192.168.1.1 is ip of router, there is no restriction required on 192.168.1.0/26, while on 192.168.1.64/26 I need to give access to some computers only.
I have done some work on it but not get success. I have done like
#iptables -A PREROUTING -t mangle -i eth1 -m mac --mac-source ab:cd:ef:12:34:56 -j MARK --set-mark 1 #ip rule add fwmark 1 table John #ip route add unreachable default table John
Then after I have tried in INPUT too.. But no success.
Quoted 7 lines
If any one have implemented in their network Please guide me. What basic mistakes I am commiting in this scenario?
Looking forward for kind reply from Network Gurus.
Thanks and regards
Bharat Merja.
- ----------------------------------------
Content-Type: text/html; charset="iso-8859-1"; name="Attachment: 1"
Content-Transfer-Encoding: quoted-printable Content-Description:
- ----------------------------------------
- --
-----------------------------------
|Oskar Andreasson | |Multisoft Education AB | |http://www.libendo.com | |phone: +46-8-6635555 | |mailto: [email protected] |
-----------------------------------
BOFH excuse #1:
clock speed
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE7uxy/xO3KTTz2r/kRAl5TAKCb4nWnOzQqD0UroaZ9pZm7oReJmgCguQAt rhVUgy8Csr2G17HaQgjtL5Q=TKAk
-----END PGP SIGNATURE-----
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Hi,
Thanks to all in advance,
In recent I need policy based routing on my Linux2.4.3 box. requirement is like to give access of Internet to some computers while this facility is not available to rest people (That is based on MAC address only).
My existin routing in "table main" is...
192.168.1.0/26 dev eth0 proto kernel scope link src 192.168.1.3 192.168.1.64/26 dev eth1 proto kernel scope link src 192.168.1.65 192.168.2.0/24 via 192.168.1.2 dev eth0
127.0.0.0/8 dev lo scope link
default via 192.168.1.1 dev eth0
Where 192.168.1.1 is ip of router, there is no restriction required on 192.168.1.0/26, while on 192.168.1.64/26 I need to give access to some computers only.
I have done some work on it but not get success. I have done like
#iptables -A PREROUTING -t mangle -i eth1 -m mac --mac-source ab:cd:ef:12:34:56 -j MARK --set-mark 1 #ip rule add fwmark 1 table John
#ip route add unreachable default table John
Then after I have tried in INPUT too.. But no success.
If any one have implemented in their network Please guide me. What basic mistakes I am commiting in this scenario?
Looking forward for kind reply from Network Gurus.
Thanks and regards
Bharat Merja.