Multipath routing problem.
Hi,
I'm currently trying to set up two link with multipath routing as follow:
/ ---- Link 0 ----X eth0
Core <-----X Linux box ---->
Router \ ---- Link 1 ----X eth1
The goal is to provide big bandwidth at nice price. with a Core router making multipath routing with equal coast.
Each ethernet interface on the linux box is a /30 network which is working correctly. But when i try to activate multipath routing with command as follow, always one link is marked as dead.
ip route add default nexthop via <gw0> dev eth0 nexthop via <gw1> dev eth1
default
nexthop via AAA.AAA.AAA.AAA dev eth0 weight 1 dead nexthop via BBB.BBB.BBB.BBB dev eth1 weight 1
In which case does this problem can occurs ?
Don't hesitate for more informations.
Kernel : 2.4.12
iproute2 : ss010824
Regards,
Pierrick.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Hello,
Quoted 9 lines · Pierrick Hascoet
Each ethernet interface on the linux box is a /30 network which is working correctly. But when i try to activate multipath routing with command as follow, always one link is marked as dead.
ip route add default nexthop via <gw0> dev eth0 nexthop via <gw1> dev eth1
default
nexthop via AAA.AAA.AAA.AAA dev eth0 weight 1 dead nexthop via BBB.BBB.BBB.BBB dev eth1 weight 1
Is the eth0 interface down?
Quoted 9 lines
In which case does this problem can occurs ?
Don't hesitate for more informations.Kernel : 2.4.12
iproute2 : ss010824Regards,
Pierrick.
Regards
--
Julian Anastasov <[email protected]>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
Quoted 7 lines · Julian Anastasov
Quoted 5 lines
ip route add default nexthop via <gw0> dev eth0 nexthop via <gw1> dev eth1
default
nexthop via AAA.AAA.AAA.AAA dev eth0 weight 1 dead nexthop via BBB.BBB.BBB.BBB dev eth1 weight 1Is the eth0 interface down?
No, the eth0 interface is up and working correctly, i can ping the router which is directly connected to eth0.
Best regards,
Pierrick.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/