Skip to contentSkip to conversation

burst / minburst, etc.

LARTC Michael T. Babcock 2 participants 2 messages Dec 6, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 4 lines · bert hubert
Quoted 2 lines

tc class add dev eth0 parent 1: classid 1:1 htb rate 20Mbit burst 4kB tc qdisc add dev eth0 parent 1:1 sfq

Raise burst, for 20Mbit it needs to be at least 20kbyte!

Is there any good documentation on setting minburst/maxburst on CBQ as well as burst rates for other queuing disciplines as mentioned above?

Signature · 7 lines
Michael T. Babcock
CTO, FibreSpeed Ltd.     (Hosting, Security, Consultation, Database, etc)
http://www.fibrespeed.net/~mbabcock/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
#1 lore raw
Quoted 8 lines · Michael T. Babcock
Quoted 4 lines · bert hubert
Quoted 2 lines

tc class add dev eth0 parent 1: classid 1:1 htb rate 20Mbit burst 4kB tc qdisc add dev eth0 parent 1:1 sfq

Raise burst, for 20Mbit it needs to be at least 20kbyte!

Is there any good documentation on setting minburst/maxburst on CBQ as well as burst rates for other queuing disciplines as mentioned above?

HTB is implemented on its own page, and mentions the bucket sizes needed. CBQ is only documented on http://ds9a.nl/lartc ... (it also mentions minburst).

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
Trilab                                 The Technology People
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/