scheduler testing
Hi all,
I am currently trying to test the schedulers available in Linux - CBQ, FIFO, PRIO, SFQ and WRR.
My setup is simple -
Source --------- Router --------- Sink
eth0 eth1
- The links are 10 Mbit links.
- I am generating average traffic of 1Mbps at the source
- I have to throttle/rate-limit the router-sink link to 1Mbps to make it look similar to a T1 link to the internet.
- I need a rate-limiting architecture which will allow be to test various schedulers as well as impose a strict limit on the outgoing link.
- I hope to cause queueing due to the statistical nature of traffic (TCP,UDP) so that instantaneous source thruput might be greater than 1Mbit/s.
I thought of using a TBF class inside a CBQ root qdisc to rate-limit traffic, but that would drop extra traffic which would prevent queuing.
I would like ideas on how to create queuing assuming that the outgoing link is like a T1 link. Also what kinds of traffic can i use to simulate real life situations?
Regards,
Amit
Signature · 13 lines
The statement below is true.
The statement above is false.
^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^
Amit Kucheria
EECS Grad. Research Assistant
University of Kansas @ Lawrence
(R)+1-(785)-830 8521 ||| (O)+1-(785)-864 7774
____________________________________________________
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/Quoted 11 lines · Amit Kucheria
Hi all,
I am currently trying to test the schedulers available in Linux - CBQ, FIFO, PRIO, SFQ and WRR.
My setup is simple -
Source --------- Router --------- Sink
eth0 eth1- The links are 10 Mbit links.
Look at www.docum.org, Stef did a lot of cool work in testing.
Quoted 2 lines
I thought of using a TBF class inside a CBQ root qdisc to rate-limit traffic, but that would drop extra traffic which would prevent queuing.
No, it will first queue quite a lot :-)
Quoted 3 lines
I would like ideas on how to create queuing assuming that the outgoing link is like a T1 link. Also what kinds of traffic can i use to simulate real life situations?
The HTB site has some stuff: http://luxik.cdi.cz/~devik/qos/htb/
Regards,
bert
Signature · 8 lines
http://www.PowerDNS.com Versatile DNS Software & Services Trilab The Technology People Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - 'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
On Fri, 7 Dec 2001, Amit Kucheria wrote:
Hi all,
I am currently trying to test the schedulers available in Linux - CBQ, FIFO, PRIO, SFQ and WRR.
My setup is simple -
10Mbit 10Mbit
Source --------- Router --------- Sink
eth0 eth1
- I need to simulate the 'router-sink' link at a T1 link. obviously the best way to do this is to but a TBF on eth1.
But i want to test various kinds of queueing disciplines with this rate limited traffic. This wont be allowed by TBF which cant take classes.
So would the following work ?
1Mbit
TBF qdisc 2:0 +--------+ ******* My various classes FIFO, CBQ
CBQ class 1:1 +----------+ +--------+ CBQ class 1:2
+-------------------------+ CBQ qdisc 1:0
Now TBF rate limits to 1Mbit and then a filter filters the packet to "my various classes which could be multiple CBQ, prio classes or simple fifo.
- I am generating average traffic of 1Mbps at the source
- I need a rate-limiting architecture which will allow be to test various schedulers as well as impose a strict limit on the outgoing link.
Regards,
Amit
Signature · 13 lines
The statement below is true.
The statement above is false.
^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^-^
Amit Kucheria
EECS Grad. Research Assistant
University of Kansas @ Lawrence
(R)+1-(785)-830 8521 ||| (O)+1-(785)-864 7774
____________________________________________________
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/