Nano-Howto and IPSec
I patched my kernel with the new routing code for 2.4.14 which already had been patched with a FreeS/WAN snapshot. However, the compilation gave me an error stating that:
ipsec_tunnel.c: In function `ipsec_tunnel_start_xmit':
ipsec_tunnel.c:1883: too few arguments to function `ip_route_output' make[3]: *** [ipsec_tunnel.o] Error 1
make[3]: Leaving directory `/usr/src/linux-2.4.14/net/ipsec' make[2]: *** [first_rule] Error 2
make[2]: Leaving directory `/usr/src/linux-2.4.14/net/ipsec' make[1]: *** [_subdir_ipsec] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.14/net'
make: *** [_dir_net] Error 2
Has anyone else run into this problem of mixing the new multipath routing code with FreeS/WAN? or am I missing something?
Signature · 8 lines
Jason A. Pattie [email protected] _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Hello,
Quoted 14 lines · Jason A. Pattie
I patched my kernel with the new routing code for 2.4.14 which already had been patched with a FreeS/WAN snapshot. However, the compilation gave me an error stating that:
ipsec_tunnel.c: In function `ipsec_tunnel_start_xmit':
ipsec_tunnel.c:1883: too few arguments to function `ip_route_output' make[3]: *** [ipsec_tunnel.o] Error 1
make[3]: Leaving directory `/usr/src/linux-2.4.14/net/ipsec' make[2]: *** [first_rule] Error 2
make[2]: Leaving directory `/usr/src/linux-2.4.14/net/ipsec' make[1]: *** [_subdir_ipsec] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.14/net'
make: *** [_dir_net] Error 2
Quoted 2 lines
Has anyone else run into this problem of mixing the new multipath routing code with FreeS/WAN? or am I missing something?
Yes but I still didn't received patch for this. Just add
one 0 as last argument to ip_route_output, make a diff -u and I'll upload it on the site. Of course, if everything else works.
Regards
--
Julian Anastasov <[email protected]>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
This a change in the file freeswan-1.94/klips/net/ipsec/ipsec_tunnel.c
The difference is a 0 added like (plain diff):
1831c1831
< physdev->iflink /* rgb: should this be 0? */))) {
---
Quoted 1 line
physdev->iflink, 0 /* rgb: should this be 0? */))) {Here's the diff -u
ipsec_tunnel.c renamed from ipsec_tunnel.c.orig +1 -1
@@ -1828,7 +1828,7 @@ skb->nh.iph->daddr, pass ? 0 : skb->nh.iph->saddr, RT_TOS(skb->nh.iph->tos), - physdev->iflink /* rgb: should this be 0? */))) { + physdev->iflink, 0 /* rgb: should this be 0? */))) { stats->tx_errors++;KLIPS_PRINT (debug_tunnel &DB_TN_XMIT , "klips_debug:ipsec_tunnel_start_xmit: "
Quoted 22 lines · Julian Anastasov
Hello,
Quoted 14 lines · Jason A. Pattie
I patched my kernel with the new routing code for 2.4.14 which already had been patched with a FreeS/WAN snapshot. However, the compilation gave me an error stating that:
ipsec_tunnel.c: In function `ipsec_tunnel_start_xmit':
ipsec_tunnel.c:1883: too few arguments to function `ip_route_output' make[3]: *** [ipsec_tunnel.o] Error 1
make[3]: Leaving directory `/usr/src/linux-2.4.14/net/ipsec' make[2]: *** [first_rule] Error 2
make[2]: Leaving directory `/usr/src/linux-2.4.14/net/ipsec' make[1]: *** [_subdir_ipsec] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.14/net'
make: *** [_dir_net] Error 2Quoted 2 lines
Has anyone else run into this problem of mixing the new multipath routing code with FreeS/WAN? or am I missing something?
Quoted 8 lines
Yes but I still didn't received patch for this. Just add
one 0 as last argument toip_route_output, make a diff -u and I'll upload it on the site. Of course, if everything else works.Regards
--
Julian Anastasov <[email protected]>
Whit
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Hello,
Quoted 1 line · Whit Blauvelt
This a change in the file
freeswan-1.94/klips/net/ipsec/ipsec_tunnel.c
Slightly changed and saved as
http://www.linuxvirtualserver.org/~julian/freeswan-1.94-routes-1.diff
Quoted 1 line
Whit
Regards
--
Julian Anastasov <[email protected]>
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/