Skip to contentSkip to conversation

Monitoring CBQ

LARTC vanitha 6 participants 8 messages Dec 21, 2001 – Dec 27, 2001

lore
Share & tools
lore

vanitha

author
#0 lore raw

Hello

Iam a small isp using CBQ to control the Bandwidth.It is working fine. The problem iam facing is that i couldn't monitor the bandwidth flow for each machine is there any tool for it.

Advance Thanks
Vanitha

#1 lore raw
Quoted 6 lines · vanitha

Hello

Iam a small isp using CBQ to control the Bandwidth.It is working fine. The problem iam facing is that i couldn't monitor the bandwidth flow for each machine is there any tool for it.

I use mrtg smartness to parse the output of tc qdisc ls and tc class ls.

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
author
#3 lore raw
In reply to vanitha

Hello Dan

Just have a look on Advanced Routing-2.4 Howto
I think you will have some ideas

Vanitha

----- Original Message -----
From: "Daniel Wittenberg" <[email protected]>
To: "vanitha" <[email protected]>
Sent: Friday, December 21, 2001 9:02 AM
Subject: Re: [LARTC] Monitoring CBQ

Quoted 7 lines

I've got a favor to ask, would it be possible to get a sanitized copy of the script you use to setup the bandwidth shaping? I've been poking around on this list, and the how-to, and just not quite understanding how some of the pieces fit together. I've been trying to find a good real-world example, but haven't found a "complete" example, just bits-n-pieces.

Quoted 10 lines

I'd be forever in your debt...

Dan

Quoted 5 lines · vanitha

Hello

Iam a small isp using CBQ to control the Bandwidth.It is working fine. The problem iam facing is that i couldn't monitor the bandwidth flow for

each machine

Quoted 7 lines
Quoted 6 lines

is there any tool for it.

Advance Thanks
Vanitha

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#4 lore raw
In reply to vanitha
Quoted 12 lines · vanitha

Hello

Iam a small isp using CBQ to control the Bandwidth.It is working fine. The problem iam facing is that i couldn't monitor the bandwidth flow for each machine
is there any tool for it.

Advance Thanks
Vanitha

Try IPAC, http://www.comlink.apc.org/~moritz/ipac.html

Regards,

Thrill

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#6 lore raw
In reply to vanitha
Quoted 6 lines · Sander

Try IPAC, http://www.comlink.apc.org/~moritz/ipac.html

Regards,

Thrill

Not Found

The requested URL /~moritz/ipac.html was not found on this server.

Apache/1.3.20 Server at mein.comlink.org Port 80

Ethy H. Brito /"\
InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
+55 (12) 3941-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
S.J.Campos - Brasil / \

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/