Skip to contentSkip to conversation

Hello

LARTC brober1 4 participants 4 messages Dec 22, 2001 – Feb 17, 2002

lore
Share & tools
lore

brober1

author
#0 lore raw

Hello, I'm new to this list and I just wanted to introduce myself. I'm a graduate student studying computer science and I am working on a project for a company that uses basic off the shelf components to construct quality of service routers for isp's. These routers use a modified version of red-hat linux with the companies proprietary software installed over top. I am experianced with networking, and fairly experianced with linux but I am familiar with all routing and traffic control capabilities available A: built into linux and B: available freely to run on linux. Right now I am basically hoping to learn and observe as much as I can. If any of you have recommendations for web sites, books, or documentation, please let me know.

Thank you for your time,
Brian Roberts

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 3 lines · On Sat, Dec 22, 2001 at 10:39:04AM -0500, brober1 wrote:

into linux and B: available freely to run on linux. Right now I am basically hoping to learn and observe as much as I can. If any of you have recommendations for web sites, books, or documentation, please let me know.

For traffic control under linux, the HOWTO+manpages basically is 'it', sadly enough.

For general TCP/IP stuff, get hold of TCP/IP Illustrated by Stevens. A must.

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
#2 lore raw

[LARTC] hello

In reply to brober1

hello devik

sorry to trouble you again. actually i had compiled htb on 2.2.17, with the old patch which was working. now i am trying to use the new patch for 2.2.17, but it says as

"RTNETLINK answers : no such file or directory"

any clue, actually i have compiled CONFIG_RTNETLINK during kernel compilation.
i am unable to make heads or tails.

should i try as answered by you for 2.4.17 kernel version, mail dated 03jan2002

Quoted 1 line
Quoted 1 line

quote

In 2.4.17 there is hange in kernel which causes this bug. As quick repair add line:
#define CONFIG_RTNETLINK 1

just before line:
#define HTB_HSIZE 16

Quoted 1 line
Quoted 1 line

unquote

if i do use as said above where do i define the above "define parameter"

regards / shekhar

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#3 lore raw

Re: [LARTC] hello

In reply to brober1
Quoted 7 lines

hello devik

sorry to trouble you again. actually i had compiled htb on 2.2.17, with the old patch which was working. now i am trying to use the new patch for 2.2.17, but it says as

"RTNETLINK answers : no such file or directory"

you should tell which command it responds for with the message above. Generaly the above doesn't seem like complaint when htb is not compiled in. Seems like another kind of error ..

Quoted 5 lines

should i try as answered by you for 2.4.17 kernel version, mail dated 03jan2002

In 2.4.17 there is hange in kernel which causes this bug. As quick repair add line:
#define CONFIG_RTNETLINK 1

it is not the case for 2.2.17. It holds only for 2.4.17. Please post more details as suggested above.

devik

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/