Skip to contentSkip to conversation

Source routing, sort of

LARTC Michael T. Babcock 1 participant 1 message Dec 24, 2001

lore
Share & tools
lore
#0 lore raw

I have a system with two interfaces, eth0 is on the Internet, eth1 on an internal connection. Because of using ipsec and its internal routing, I need certain connections to be made from the internal interface that will be going out over the ipsec0 device.

For example:
eth0: 1.2.3.4 (internet address)
ipsec0: 1.2.3.4 (always the same as the external interface)
eth1: 192.168.0.1 (internal address)

ping -n 192.168.1.1 (over VPN) attempts to send a ping from 1.2.3.4 because ipsec0's interface address is 1.2.3.4. How can I get arbitrary connects, based on destination, to be sourced from 192.168.0.1 instead of 1.2.3.4?

I'm assuming some basic source NATting is required; off to read the docs again ...

Signature · 7 lines
Michael T. Babcock
CTO, FibreSpeed Ltd.     (Hosting, Security, Consultation, Database, etc)
http://www.fibrespeed.net/~mbabcock/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/