Skip to contentSkip to conversation

Two-way Shared Traffic shaping and NAT

LARTC Sumit Pandya 4 participants 6 messages Dec 25, 2001

lore
Share & tools
lore
#0 lore raw

Hi Devik and All,

Quoted 1 line
Quoted 1 line

You can find more information on http://luxik.cdi.cz/~devik/qos/. There

is only one relase, but it's so simple, that are no bugs (according to Devik).
I want an architecturial/functional details of your "IMQ" development.
The document on the link is insufficient to explain anything. If you can please get time to outline about every information about IMQ then I'm sure it will be going to useful to many peoples. It would be nice to go ahead with a case study also like HTB.
Hey one more request for documentation. Its regarding HTB. Why its devloped
and how its superb or advantagious against CBQ?

Thanks.
-- Sumit

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 6 lines · Sumit Pandya

Hi Devik and All,

Quoted 1 line
Quoted 1 line

You can find more information on http://luxik.cdi.cz/~devik/qos/. There

is only one relase, but it's so simple, that are no bugs (according to Devik).
I want an architecturial/functional details of your "IMQ" development.

So you want that.

Quoted 1 line

The document on the link is insufficient to explain anything. If you can

You may be insufficiently smart to grasp it.

I seriously think you did not grap how open source works. This is *not* the way to participate!

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
#2 lore raw
In reply to Sumit Pandya

Hey Bert,

I'd like to go through detail of nice effort made by you peoples. As you
answered, to use IMQ for my requirement, I placed this question. How did you answered is quite sarcastic to me. I feel that you forgot yourself as a good contributor of open-source. Otherwise there would be a warm support to test your development at one more place and feedback you.

Oh yeah I confess that I'm a novice in open-source development but not
newbie and very much experienced with Linux kernel network code. Which includes netfilter hack, some driver modification and detail understanding of Linux routing code... Anyway I'm not intended to describe my skills.
I won’t replace my request to you, infact this time loud against whatever I
shown you for my contribution; ya simple but not trivial "a detail feedback".

Thankx if you take some time off to write for me to go ahead task.
-- Sumit

-----Original Message-----
From: bert hubert [mailto:[email protected]]
Sent: Tuesday, December 25, 2001 5:51 PM
To: Sumit Pandya
Cc: [email protected]; [email protected]
Subject: Re: Re: [LARTC] Re: Two-way Shared Traffic shaping and NAT

Quoted 3 lines · Sumit Pandya

Hi Devik and All,

Quoted 1 line
Quoted 1 line

You can find more information on http://luxik.cdi.cz/~devik/qos/.

There

Quoted 3 lines

is only one relase, but it's so simple, that are no bugs (according to Devik).
I want an architecturial/functional details of your "IMQ"

development.

So you want that.

Quoted 1 line

The document on the link is insufficient to explain anything. If you can

You may be insufficiently smart to grasp it.

I seriously think you did not grap how open source works. This is *not* the way to participate!

Regards,
bert

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#3 lore raw
In reply to Sumit Pandya
Quoted 7 lines · Sumit Pandya

Hey Bert,

I'd like to go through detail of nice effort made by you peoples. As you
answered, to use IMQ for my requirement, I placed this question. How did you answered is quite sarcastic to me. I feel that you forgot yourself as a good contributor of open-source. Otherwise there would be a warm support to test your development at one more place and feedback you.

It is a mistake that the open source world consists of saints. For it doesn't. It's like any other community in that it is a two way effort. You don't go complaining to volunteers. If you find that something is lacking, your best action is to fix it.

If unable to do so, the only thing left is to try to convince people who can rectify the problem to do so. Confronting them with your demands is not the way to do so - it is even insulting!

Also, please not that I am not the HTB/IMQ developer.

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
#4 lore raw
In reply to Sumit Pandya
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Quoted 1 line

You can find more information on http://luxik.cdi.cz/~devik/qos/. There

is only one relase, but it's so simple, that are no bugs (according to Devik).
I want an architecturial/functional details of your "IMQ" development.

So you want that.

Hehe .. yes. At least you (Sumit) should change "want" to "it could be nice" or similar :-)

Quoted 3 lines
Quoted 1 line

The document on the link is insufficient to explain anything. If you can

You may be insufficiently smart to grasp it.

Maybe I'd have to say something here. IIRC I've stated in the document that the IMQ is not documented well yet. There are two reasons for it.
The first is that inner working of IMQ is so incredibly simple that one look at patch source code should be enough.
The second one is that many developers do its open source work in their free time. When I write something I document it up to the level where smart techie can catch up.
When some code/idea gets too popular then people often go and offers me help and ideas about documentation.
Like Bert and Don in HTB case.

Quoted 2 lines

I seriously think you did not grap how open source works. This is *not* the way to participate!

And I have to agree here with Bert. If you want IMQ to be more documented then look at it try to write some decent help document and for such work I will answer all what you might need to do it.

In fact when cooperating with Don I send him many kilobytes of answers :)

Regards, devik

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#5 lore raw
In reply to Sumit Pandya
Quoted 3 lines · bert hubert
Quoted 2 lines · Sumit Pandya

I'd like to go through detail of nice effort made by you peoples. As you
answered, to use IMQ for my requirement, I placed this question. How did you

You'll probably find that many open source projects are documented in their source code. Did you download the IMQ source and read through it? If you're not a programmer then a beta-quality project is not the place to hang out and you might want to wait until it is finished and fully documented for average-joe use. At that point, you will have your documentation.

Of course, that point may never come, but feel free to pay a developer to do it for you.

Quoted 5 lines
Quoted 3 lines

answered is quite sarcastic to me. I feel that you forgot yourself as a good contributor of open-source. Otherwise there would be a warm support to test your development at one more place and feedback you.

It is a mistake that the open source world consists of saints.

Mmm ... Linus Torvalds ... the least sarcastic person in the world ... :-P

Quoted 1 line

Also, please not that I am not the HTB/IMQ developer.

Bert's just the guy who freely develops a fairly high quality FAQ and HOWTO w.r.t. the advanced routing & traffic control features of Linux. I've given him a hard time about that before, but I wouldn't tell him to document something unless he wanted to (maybe as a suggestion ;-).

Signature · 7 lines
Michael T. Babcock
CTO, FibreSpeed Ltd.     (Hosting, Security, Consultation, Database, etc)
http://www.fibrespeed.net/~mbabcock/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/