iptables mark & iproute related !
hi all
i did the following test again but ..:( .. failed again !! i need some guidance now from Gurus here..
iptables -A PREROUTING -t mangle -i eth1 -s ..... -j mark 101 iptables -A PREROUTING -t nat -i eth1 -s ... -j REDIRECT --to-port 3128
tc qdisc ............... handle 101 fw flowid 1:170
iptables -nvL INPUT , iptables -nvL -t mangle , iptables -nvL -t nat did show data passing BUT i couldnt limit bandwidth !!!
tc -s -d class/qdisc...... command didnt show any data pasing thru--i.e it remained ZERO !
i am already running a bandwidth restrictor(cbq+sfq) & while doing this test i only changed the above tc command !
my requirement is to provide bandwidth based on port network(local net). iproute2 verision ss010803
iptables version v1.2.4
kernel 2.4.17
i would be grateful for some direction ....
thanx in anticipation
arindam haldar
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 4 lines · Arindam Haldar
hi all
i did the following test again but ..:( .. failed again !! i need some guidance now from Gurus here..
If you execute iptables -L -v -n -t nat, you can see the byte counters for each rule you inserted. Are these incremented or not if you generate some traffic ?
Stef
Quoted 10 lines
iptables -A PREROUTING -t mangle -i eth1 -s ..... -j mark 101 iptables -A PREROUTING -t nat -i eth1 -s ... -j REDIRECT --to-port 3128
tc qdisc ............... handle 101 fw flowid 1:170
iptables -nvL INPUT , iptables -nvL -t mangle , iptables -nvL -t nat did show data passing BUT i couldnt limit bandwidth !!!
tc -s -d class/qdisc...... command didnt show any data pasing thru--i.e it remained ZERO !
Signature · 8 lines
[email protected] More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
hi
i did those test & as i said in my last mail there is trafic passing thru ir bytes counter r increasing but the tc command doesnt show any restircition. seem like marked pkts r not going thru the iproute
any suggestions ??
thanx in anticipation
arindam haldar
Quoted 4 lines · Arindam Haldar
hi all
i did the following test again but ..:( .. failed again !! i need some guidance now from Gurus here..
If you execute iptables -L -v -n -t nat, you can see the byte counters for each rule you inserted. Are these incremented or not if you generate some traffic ?
Stef
Quoted 11 lines
iptables -A PREROUTING -t mangle -i eth1 -s ..... -j mark 101 iptables -A PREROUTING -t nat -i eth1 -s ... -j REDIRECT --to-port 3128
tc qdisc ............... handle 101 fw flowid 1:170
iptables -nvL INPUT , iptables -nvL -t mangle , iptables -nvL -t nat did show data passing BUT i couldnt limit bandwidth !!
tc -s -d class/qdisc...... command didnt show any data pasing thru--i.e it remained ZERO !
Signature · 11 lines
[email protected] More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 4 lines · Arindam Haldar
hi
i did those test & as i said in my last mail there is trafic passing thru ir bytes counter r increasing but the tc command doesnt show any restircition. seem like marked pkts r not going thru the iproute
Sorry, you wrote to encrypted for me to understand everything ;-) If I understand correctly, everything works if you use CBQ & SFQ, but the fw filter is not working like it should be ?
Quoted 1 line
any suggestions ??
Can you post the scripts you are using so I can try them myself ?
Stef
Signature · 8 lines
[email protected] More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
hi,
Quoted 9 lines · Stef Coene
Quoted 5 lines · Arindam Haldar
hi
i did those test & as i said in my last mail there is trafic passing thru ir bytes counter r increasing but the tc command doesnt show any restircition. seem like marked pkts r not going thru the iprouteSorry, you wrote to encrypted for me to understand everything ;-) If I understand correctly, everything works if you use CBQ & SFQ, but the fw filter is not working like it should be ?
YES !!! .. UR ABSOLUTELY RIGHT !!!! :-)
Quoted 7 lines
Quoted 3 lines
any suggestions ??
Can you post the scripts you are using so I can try them myself ?
Stef
THIS IS MY TRUNCATED SCRIPT(MARK RELATED) !
iptables -A INPUT -i eth4 -s 192.168.1.1 -j ACCEPT
iptables -A FORWARD -o eth0 -s 192.168.1.1 -j ACCEPT iptables -A PREROUTING -t nat -i eth4 -p 6 --dport 80 -j REDIRECT --to-port 3128
iptables -A PREROUTING -t mangle -i eth4 -s 192.168.1.1 -d a.b.c.d -j MARK --set-mark 55
iptables -A PREROUTING -t mangle -i eth4 -s 192.168.1.1 -d ! a.b.c.d -j MARK --set-mark 51
iptables -A POSTROUTING -t mangle -o eth0 -s 192.168.1.1 -j MASQUERADE
iptables -A PREROUTING -t nat -i eth0 -d 192.168.1.1 -s a.b.c.d -j MARK --set-mark 56
iptables -A PREROUTING -t mangle -i eth0 -d 192.168.1.1 -s ! a.b.c.d -j MARK --set-mark 52
###--32kbps for x-LAN
tc class add dev eth4 parent 5:1 classid 5:191 est 2sec 10sec cbq bandwidth 512Kbit rate 32Kbit allot 5\1514 weight 3.2Kbit prio 2 maxbrust 5 avpkt 1500 bounded
tc qdisc add dev eth4 parent 5:191 sfq perturb 10
tc filter add dev eth4 parent 5:0 protocol ip prio 10 handle 51 fw flowid 5:191
tc filter add dev eth4 parent 5:0 protocol ip prio 10 handle 52 fw flowid 5:191
###--128 for LAN
tc class add dev eth4 parent 5:1 classid 5:192 est 2sec 10sec cbq bandwidth 512Kbit rate 128Kbit allot 5\1514 weight 3.2Kbit prio 2 maxbrust 5 avpkt 1500 bounded
tc qdisc add dev eth4 parent 5:192 sfq perturb 10
tc filter add dev eth4 parent 5:0 protocol ip prio 10 handle 55 fw flowid 5:192
tc filter add dev eth4 parent 5:0 protocol ip prio 10 handle 56 fw flowid 5:192
similar for eth0 too !!
thanx in anticipation
arindam haldar
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/