Skip to contentSkip to conversation

New and need help with TC

LARTC Stefan Schueller 2 participants 2 messages Jan 4, 2002 – Jan 5, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

I'm new to this list and I was wondering if any of you could help me out with my traffic problem.

I did get some limiting to work but it's not working the way I want and that's mostly because I still don't understand some of the commands I'm using. I want to limit my total bandwidth to a maximum of 256kbits but I don't want one user to take it all. I also don't want to have everyone suffer because one site has a lot of hits. I want to make the site with the high traffic slower than the other sites but I don't want the total to go over 256kbits. The IP of the high traffic site is 209.150.199.225. All others should be able to download at a speed up to 200k and have priority over the high traffic site.

Also does anyone have a nice traffic monitor that shows me the traffic of each IP which I can use with rrdtool? I have cban right now but it only shows overall traffic on the adapter.

Here is what I have right now. It is limiting traffic at 256kbits more or less but I still get spikes over 1mbits which kills my avarage and gets me the high ISP bill at the end of the month.

This is what I want (kind of):
*************************************************
* eth0 (Limit to 256kbits) *
* ********************** ********************** *
* * Lower Priority * * Higher Priority * *
* * 209.58.199.225 * * All other IPs * *
* * (150k Max total)* * (200k Max total) * *
* * (100K max per * * (180k max per * *
* * connection) * * connection) * *
* ********************** ********************** *
************************************************

This is what I'm doing:

# I don't know if I have to do this at all

/sbin/ip address add 209.58.199.225 dev eth0
/sbin/ip address add 209.58.199.226 dev eth0
/sbin/ip address add 209.58.199.227 dev eth0
/sbin/ip address add 209.58.199.228 dev eth0
/sbin/ip address add 209.58.199.229 dev eth0
/sbin/ip address add 209.58.199.230 dev eth0
/sbin/ip address add 209.58.199.231 dev eth0
/sbin/ip address add 209.58.199.232 dev eth0
/sbin/ip address add 209.58.199.233 dev eth0
/sbin/ip address add 209.58.199.234 dev eth0
/sbin/ip address add 209.58.199.235 dev eth0
/sbin/ip address add 209.58.199.236 dev eth0
/sbin/ip address add 209.58.199.237 dev eth0
/sbin/ip address add 209.58.199.238 dev eth0
/sbin/ip address add 209.58.199.239 dev eth0

# Here I think I'm making some kind of parent which limits all traffic to
256kbits, its name is 1

/sbin/tc qdisc add dev eth0 root handle 1: cbq bandwidth 256kbit avpkt 1000

 # create a subparanet of parent 1:0 called 1:1 with also a 256kbits limit?
Not sure what the other half of the comand does?!allot? weight?

/sbin/tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 256Kbit
rate 256Kbit allot 1500 weight 16 avpkt 1000

#create a child of parent 1:1 called 1:10 and some limiting I don't
undertand?!

/sbin/tc class add dev eth0 parent 1:1 classid 1:10 cbq bandwidth 200Kbit
rate 180Kbit allot 1500 weight 100kbit prio 5 maxburst 20 avpkt 1000 bounded

/sbin/tc class add dev eth0 parent 1:1 classid 1:11 cbq bandwidth 150Kbit
rate 100Kbit allot 1500 weight 64kbit prio 5 maxburst 20 avpkt 1000 bounded

#??? u32??

/sbin/tc filter add dev eth0 parent 1:0 protocol ip prio 5 handle 1: u32
divisor 1

#Filter IPs to certain children

/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.225 flowid 1:11
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.226 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.227 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.228 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.229 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.230 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.231 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.232 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.233 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.234 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.235 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.236 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.237 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.238 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.199.239 flowid 1:10
/sbin/tc filter add dev eth0 parent 1:0 protocol ip u32 match ip src
209.58.150.51 flowid 1:10

Do I make any sense?

thanks for any help you can give me.

-Stefan
[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 9 lines · Stefan Schueller

I did get some limiting to work but it's not working the way I want and that's mostly because I still don't understand some of the commands I'm using. I want to limit my total bandwidth to a maximum of 256kbits but I don't want one user to take it all. I also don't want to have everyone suffer because one site has a lot of hits. I want to make the site with the high traffic slower than the other sites but I don't want the total to go over 256kbits. The IP of the high traffic site is 209.150.199.225. All others should be able to download at a speed up to 200k and have priority over the high traffic site.

Ok. What you want is a 256kbit/s CBQ with SFQ within.

Quoted 3 lines

Also does anyone have a nice traffic monitor that shows me the traffic of each IP which I can use with rrdtool? I have cban right now but it only shows overall traffic on the adapter.

I use iptables to make rules matching each IP, and then hook that up to rrdtool with some sed/grep magic.

Quoted 3 lines

Here is what I have right now. It is limiting traffic at 256kbits more or less but I still get spikes over 1mbits which kills my avarage and gets me the high ISP bill at the end of the month.

You may want to read http://ds9a.nl/lartc/manpages - It will explain the stuff you are guessing at. How does your ISP measure your usage? 10 second interval? The ISPs I know use a 5 minute interval.

Regards,

bert

Signature · 8 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/