Skip to contentSkip to conversation

iptables mark & iproute]

LARTC Arindam 1 participant 1 message Jan 9, 2002

lore
Share & tools
lore

Arindam

author
#0 lore raw

hi all
At last i got sucess !.. but am confused y it didnt work earlier..the difference today was that i reinstalled RH7.2 & complied kernel 2.4.16(not 17).. rest was same..... & the bandwidth too is under control!.. is it normal for to get more than said bandwidth--i mean i restricted a network with 8Kbit(with same script as below) but still was able to get a download(ftp) of 17Kbit(as shown in iptraf)
a very spl. thanx 2 Stef and 2 all of u for ur time with my problem arindam haldar

-------- Original Message --------
Subject: Re: [LARTC] iptables mark & iproute
Date: Mon, 07 Jan 2002 14:13:09 +0530
From: Arindam <[email protected]>
To: [email protected]
CC: Stef Coene <[email protected]>

hi..i posted this message sometime back.. can pls someone help me with it.. i basically want traffic to be restricted for all server outside my network ie. 4e.g 64kbps for internet but 512kbps for my lan servers(web/smtp)..
i though of doing this(as the script will tell u)--mark packets with iproute & restrict the traffic with iprote2(lan-web or smtp)..if no mark then pass thru the default bandwidth for the ip group !!
the linux box is always handling 1Mb+ traffic from eth0(net interface)..

awaiting some guidance for u Gurus there...
arindam haldar

Message: 6 Date: Fri, 04 Jan 2002 11:24:30 +0530 From: Arindam Haldar <[email protected]> To: Stef Coene <[email protected]> Cc:
[email protected] Subject: Re: [LARTC] iptables mark & iproute

Quoted 4 lines · Stef Coene
Quoted 2 lines · Arindam Haldar

hi
i did those test & as i said in my last mail there is trafic passing

thru

Quoted 6 lines
Quoted 3 lines

ir bytes counter r increasing but the tc command doesnt show any restircition. seem like marked pkts r not going thru the iproute

Sorry, you wrote to encrypted for me to understand everything [;-)] If I understand correctly, everything works if you use CBQ & SFQ, but

the fw

Quoted 1 line

filter is not working like it should be ?

YES !!! .. UR ABSOLUTELY RIGHT !!!! [:-)]

Quoted 9 lines
Quoted 4 lines

any suggestions ??

Can you post the scripts you are using so I can try them myself ?

Stef

THIS IS MY TRUNCATED SCRIPT(MARK RELATED) !

iptables -A INPUT -i eth4 -s 192.168.1.1 -j ACCEPT

iptables -A FORWARD -o eth0 -s 192.168.1.1 -j ACCEPT iptables -A PREROUTING -t nat -i eth4 -p 6 --dport 80 -j REDIRECT --to-port 3128
iptables -A PREROUTING -t mangle -i eth4 -s 192.168.1.1 -d a.b.c.d -j MARK --set-mark 55
iptables -A PREROUTING -t mangle -i eth4 -s 192.168.1.1 -d ! a.b.c.d -j MARK --set-mark 51
iptables -A POSTROUTING -t mangle -o eth0 -s 192.168.1.1 -j MASQUERADE

iptables -A PREROUTING -t nat -i eth0 -d 192.168.1.1 -s a.b.c.d -j MARK --set-mark 56
iptables -A PREROUTING -t mangle -i eth0 -d 192.168.1.1 -s ! a.b.c.d -j MARK --set-mark 52

###--32kbps for x-LAN
tc class add dev eth4 parent 5:1 classid 5:191 est 2sec 10sec cbq bandwidth 512Kbit rate 32Kbit allot 5\1514 weight 3.2Kbit prio 2 maxbrust 5 avpkt 1500 bounded
tc qdisc add dev eth4 parent 5:191 sfq perturb 10
tc filter add dev eth4 parent 5:0 protocol ip prio 10 handle 51 fw flowid 5:191
tc filter add dev eth4 parent 5:0 protocol ip prio 10 handle 52 fw flowid 5:191
###--128 for LAN
tc class add dev eth4 parent 5:1 classid 5:192 est 2sec 10sec cbq bandwidth 512Kbit rate 128Kbit allot 5\1514 weight 3.2Kbit prio 2 maxbrust 5 avpkt 1500 bounded
tc qdisc add dev eth4 parent 5:192 sfq perturb 10
tc filter add dev eth4 parent 5:0 protocol ip prio 10 handle 55 fw flowid 5:192
tc filter add dev eth4 parent 5:0 protocol ip prio 10 handle 56 fw flowid 5:192

similar for eth0 too !!
thanx in anticipation

arindam haldar

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/