Skip to contentSkip to conversation

Remarks about the HOWTO

LARTC Stef Coene 2 participants 2 messages Jan 9, 2002

lore
Share & tools
lore

Stef Coene

author
#0 lore raw
Quoted 6 lines · Laurent Foucher

Hello,

I have some remarks about the chapter 9 :

* At the beginning, the term "mbit" appears with two differents definitions (kilo bits/s and kilo bit).

Yep. that's how "tc" works. When you use mbit provide a speed, it's kilo bit/s. When you use mbit to provide a packet size, it's kilo bit.

Quoted 8 lines

* In the chapter about pfifo_fast, the table that give the values of TOS, the Linux priority and the band. I don't understand why the last column (band) is different of the default priomap given just after (on the commandline).

* In the chapter, "How filters are used to classify traffic", the tree. What's represent the numbers ? Are they the handles of the classes or the handles of the qdisc ? It's not really clear for me.

I suppose you mean chapter 9.6
1: = 1:0 = qdisc (second number is zero)

Quoted 14 lines

* I haven't very well understood the chapter "How packets are dequeued to the hardware". I don't understand if all the classes are quering or not ? Well, i think that this chapter is not clear enough.

Hope that these remarks will improve the HOWTO,

Regards,

Laurent Foucher

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

Signature · 8 lines
[email protected]
 More QOS info : http://www.docum.org/
 Title : "Using Linux as bandwidth manager"
     

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
#1 lore raw

Hello,

I have some remarks about the chapter 9 :

* At the beginning, the term "mbit" appears with two differents definitions (kilo bits/s and kilo bit).

* In the chapter about pfifo_fast, the table that give the values of TOS, the Linux priority and the band. I don't understand why the last column (band) is different of the default priomap given just after (on the commandline).

* In the chapter, "How filters are used to classify traffic", the tree. What's represent the numbers ? Are they the handles of the classes or the handles of the qdisc ? It's not really clear for me.

* I haven't very well understood the chapter "How packets are dequeued to the hardware". I don't understand if all the classes are quering or not ? Well, i think that this chapter is not clear enough.

Hope that these remarks will improve the HOWTO,

Regards,

Laurent Foucher

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/