newbie problem
Ok, I've got htb + iproute compiled and going, and tried to run this script, but doesn't seem to work. I've got a 768k DSL that I was going to try and cut ssh (scp) down to 8k for testing, but doesn't seem to do any good...ideas?
#### begin script ####
# Does this flush it?
tc qdisc del dev eth0 root handle 1:0
tc qdisc add dev eth0 root handle 1:0 htb default 99
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 768kbps ceil 768kbps burst 2k
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 8kbps ceil 8kbps burst 2k
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match tcp dst 22 0xffff flowid 1:1
#### end script ####
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Please, kbps = k Bytes per second. You want to use kbit instead probably.
Quoted 18 lines · Daniel Wittenberg
Ok, I've got htb + iproute compiled and going, and tried to run this script, but doesn't seem to work. I've got a 768k DSL that I was going to try and cut ssh (scp) down to 8k for testing, but doesn't seem to do any good...ideas?
#### begin script ####
# Does this flush it?
tc qdisc del dev eth0 root handle 1:0tc qdisc add dev eth0 root handle 1:0 htb default 99
tc class add dev eth0 parent 1:0 classid 1:1 htb rate 768kbps ceil 768kbps burst 2k
tc class add dev eth0 parent 1:1 classid 1:10 htb rate 8kbps ceil 8kbps burst 2k
tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match tcp dst 220xffffflowid 1:1
Quoted 8 lines
#### end script ####
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/