am i on the right track ?
hi,
i am trying to have bandwidth shaping on my linux router.
i have a 64kbps link, on which i want to restrict the link use for http /ftp access and give more bandwidth priority for vpn access. thanks to martin devera i am using the htb for this.
|-----------| |-----------|
| MAIN LINK |-----+------| CLASS A |
|-----------| | |-----------|
|
|------+-----|
| CLASS B |
|------------|MAIN LINK = 64kbps
CLASS A = 24kbps (for HTTP/ FTP and other internet related activities ) CLASS B = 40kbps ( reserved for PPTP-VPN access incoming and outgoing)
requirements :
each class should be able to borrow bandwidth from the other class when excess is available
incoming vpn connections should come through the class B bandwidth policy outgoing vpn connections should go through the class B bandwidth policy
following is the command set (lifted from the htb manual :-) ) i am trying to use :
# tc qdisc add dev eth0 root handle 1: htb default 11 # tc class add dev eth0 parent 1: classid 1:1 htb rate 64kbps ceil 64 kbps burst 2k # tc class add dev eth0 parent 1: classid 1:10 htb rate 64kbps ceil 64 kbps burst 2k # tc class add dev eth0 parent 1: classid 1:11 htb rate 64kbps ceil 64 kbps burst 2k # tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 192.168.1.0 match tcp dst 21 0xffff flowid \ 1:10 # tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 192.168.1.0 match tcp dst 80 0xffff flowid \ 1:10 # tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src 192.168.1.0 match tcp dst 443 0xffff flowid \ 1:10 # tc qdisc add dev eth0 parent 1:10 handle 20: pfifo limit 5 # tc qdisc add dev eth0 parent 1:11 handle 30: sfq perturb 10
first i would like to know whether what i have done is correct or not in context with my problem , i think i am on right track ?
why i did what i did
now to meet the above requirements what i did was to define bandwidth shaping only for http, https & ftp (the major bandwidth guzzlers to class A and made the class B as default.
but because of above rulesets my other inet services (like domain, ssh, whois, ping etc) will go through the default policy of class B, which i want to avoid without adding additional rulesets; can i define a ruleset
for VPN something like below : (and remove the rulesets for class A
and make clas A as default)
# tc filter add dev eth0 protocol 47 parent 1:0 prio 1 u32 match ip src
192.168.1.0 flowid 1:11
# tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip src
192.168.1.0 match tcp dst 1723 0xffff \
flowid 1:11but how do i define the ruleset for incoming connections, can the following be true
# tc filter add dev eth0 protocol 47 parent 1:0 prio 1 u32 match ip dst
192.168.1.0 flowid 1:11
# tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dst
192.168.1.0 match tcp dst 1723 0xffff \
flowid 1:11thanx in advance
regards / shekhar
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
I have not too much time to read it just now. But just wondering if you really want 64kbps or rather 64kbit ?
devik
Quoted 4 lines · Chandrashekhar Joshi
hi,
i am trying to have bandwidth shaping on my linux router.
i have a 64kbps link, on which i want to restrict the link use for http
....
Quoted 3 lines
MAIN LINK = 64kbps
CLASS A = 24kbps (for HTTP/ FTP and other internet related activities ) CLASS B = 40kbps ( reserved for PPTP-VPN access incoming and outgoing)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
yes it is 64kbps (actually it is 256kbits so i suppose that works out to 64kbps right)
thanks
regards /shekhar
Quoted 21 lines · Martin Devera
I have not too much time to read it just now. But just wondering if you really want 64kbps or rather 64kbit ?
devikQuoted 5 lines · Chandrashekhar Joshi
hi,
i am trying to have bandwidth shaping on my linux router.
i have a 64kbps link, on which i want to restrict the link use for http....
Quoted 4 lines
MAIN LINK = 64kbps
CLASS A = 24kbps (for HTTP/ FTP and other internet related activities ) CLASS B = 40kbps ( reserved for PPTP-VPN access incoming and outgoing)
I don't understand it .. 256kbit = 32kbps. Why
do you use 64kbps !?
Quoted 31 lines · Chandrashekhar Joshi
yes it is 64kbps (actually it is 256kbits so i suppose that works out to 64kbps right)
thanks
regards /shekharQuoted 21 lines · Martin Devera
I have not too much time to read it just now. But just wondering if you really want 64kbps or rather 64kbit ?
devikQuoted 5 lines · Chandrashekhar Joshi
hi,
i am trying to have bandwidth shaping on my linux router.
i have a 64kbps link, on which i want to restrict the link use for http....
Quoted 4 lines
MAIN LINK = 64kbps
CLASS A = 24kbps (for HTTP/ FTP and other internet related activities ) CLASS B = 40kbps ( reserved for PPTP-VPN access incoming and outgoing)
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 2 lines · Martin Devera
I don't understand it .. 256kbit = 32kbps. Why
do you use 64kbps !?
No, 256kbit is 256kb/s is 32KB/s.
Lowercase means bits, uppercase means bytes.
Rob
Signature · 8 lines
Rob Kaper - [email protected] phone - +31 10 2436060 fax - +31 10 2436066 cell - +31 64 7114454 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Are sure ? I'm speaking in tc terms ..
Quoted 17 lines · Rob Kaper
Quoted 2 lines · Martin Devera
I don't understand it .. 256kbit = 32kbps. Why
do you use 64kbps !?No, 256kbit is 256kb/s is 32KB/s.
Lowercase means bits, uppercase means bytes.
Rob
Signature · 4 lines
Rob Kaper - [email protected] phone - +31 10 2436060 fax - +31 10 2436066 cell - +31 64 7114454
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 1 line · Martin Devera
Are sure ? I'm speaking in tc terms ..
Hm, I'm speaking in human terms. ;-)
It's what I (and most others) would expect anyway.
Quoted 1 line
Quoted 1 line
No, 256kbit is 256kb/s is 32KB/s.
Rob
Signature · 8 lines
Rob Kaper - [email protected] phone - +31 10 2436060 fax - +31 10 2436066 cell - +31 64 7114454 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 4 lines · Martin Devera
Quoted 1 line
Are sure ? I'm speaking in tc terms ..
Hm, I'm speaking in human terms. ;-)
I know. I don't assume that Joshi is fool so that I don't try to explain him difference between bit and byte.
I wrote the mail because kbit and kbps are different terms in tc and despite being in FAQ users still don't understand it.
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
hi,
yes it was a small oops in calculation, (or was it a big one :-) ) but back to the main theme are my rulesets correct ???
shekhar
Quoted 13 lines · Rob Kaper
Quoted 2 lines · Martin Devera
Are sure ? I'm speaking in tc terms ..
Hm, I'm speaking in human terms. ;-)
It's what I (and most others) would expect anyway.
Quoted 2 lines
Quoted 2 lines
No, 256kbit is 256kb/s is 32KB/s.
Rob
Yes is seems to be.
Quoted 4 lines · Chandrashekhar Joshi
hi,
yes it was a small oops in calculation, (or was it a big one :-) ) but back to the main theme are my rulesets correct ???
Quoted 19 lines
shekhar
Quoted 13 lines · Rob Kaper
Quoted 2 lines · Martin Devera
Are sure ? I'm speaking in tc terms ..
Hm, I'm speaking in human terms. ;-)
It's what I (and most others) would expect anyway.
Quoted 2 lines
Quoted 2 lines
No, 256kbit is 256kb/s is 32KB/s.
Rob
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/