Skip to contentSkip to conversation

Policy routing work in 2.2 but not in 2.4

LARTC Theodor Milkov 1 participant 1 message Jan 18, 2002

lore
Share & tools
lore
#0 lore raw

Hello,

I recently upgraded one of our routers with 2.4.17 Linux kernel and unfortunately my policy routing that used to work with 2.2.20 kernel failed. Quick test:

# uname -r
2.2.20
# ip rule ls
0:      from all lookup local
32765:  from all to 1.1.1.1 tos 0x02 lookup 199
32766:  from all lookup main
32767:  from all lookup 253
# ip route ls table 199
1.1.1.1 via 10.0.0.2 dev eth1
# ip route get to 1.1.1.1 tos 0x02
1.1.1.1 tos 0x02 via 10.0.0.2 dev eth1  src 10.0.0.1
       cache  mtu 1500 rtt 375ms
# ip route get to 1.1.1.1 tos 0x08
1.1.1.1 tos 0x08 via 192.168.0.1 dev eth0  src 192.168.0.2
       cache  mtu 1500 rtt 375ms

In this example everything seems ok - 192.168.0.1 is default gw. Lets see the next example:

# uname -r
2.4.17
# ip ru ls
0:      from all lookup local
32765:  from all to 1.1.1.1 tos 0x02 lookup 199
32766:  from all lookup main
32767:  from all lookup 253
# ip route ls table 199
1.1.1.1 via 10.0.0.2 dev eth2
# ip route get to 1.1.1.1 tos 0x02
RTNETLINK answers: Network is unreachable
# ip route get to 1.1.1.1 tos 0x08
RTNETLINK answers: Network is unreachable

So, in this example the 'ip rule' is ignored and thus lookup to table 199 never happens. Both kernels where compiled with 'CONFIG_IP_ROUTE_TOS=y'. iproute packages are iproute2-ss001007 for linux-2.2 kernel and iproute2-ss010824 for linux-2.4. What could be wrong?

Best regards,

Signature · 9 lines
       Theodor Milkov           Administrator IP Networks
       Davidov Net              Phone: +359 (2) 730158
       PGP: http://www.zimage.delbg.com/zimage.asc



_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/