Skip to contentSkip to conversation

basic question about token bucket filter

LARTC [email protected] 2 participants 3 messages Jan 20, 2002

lore
Share & tools
lore
#0 lore raw

Hi there,

I just started playing around with prioritizing traffic. However I do have some questions left :P

I am using the following setup:
tc qdisc add dev ppp0 root handle 1: prio
tc qdisc add dev ppp0 parent 1:1 handle 10: sfq
tc qdisc add dev ppp0 parent 1:2 handle 20: tbf rate 61kbit latency 50ms burst 1540 tc qdisc add dev ppp0 parent 1:3 handle 30: sfq

I use the mangle table of iptables to force the TOS bit (based on the tcp src or tcp dst port) in order to sent interactive traffic to band 0 (1:1), bulk traffic to band 2 (1:3) and remaining traffic to band 1 (1:2).

This seems to work. I do see packets flow trough the mangle table (iptables -t mangle -vnL) and I do see interactive traffic go band 0 , etc.. (tc -s qdisc ls dev ppp0).

However I do not notice much of a difference. While downloading some linux kernels a telnet session still slows down a lot :( Any ideas how this might be possible?

Best regards,

--
Ronald Verlaan
http://80.60.86.86
[email protected]
--------------------------------------------------------------------------
Five is a sufficiently close approximation to infinity.
-- Robert Firth

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 7 lines · On Sun, Jan 20, 2002 at 03:55:49PM +0100, [email protected] wrote:

This seems to work. I do see packets flow trough the mangle table (iptables -t mangle -vnL) and I do see interactive traffic go band 0 , etc.. (tc -s qdisc ls dev ppp0).

However I do not notice much of a difference. While downloading some linux kernels a telnet session still slows down a lot :( Any ideas how this might be possible?

Yep, quite simple: your upstream provider is not shaping, hence the interactive traffic still needs to wait for the `big' packets from the download. However, your solution should help you when you're uploading lots of data. :)

Regards,

Signature · 7 lines
Jasper Spaans
http://jsp.ds9a.nl/contact/
Tel/Fax: +31-84-8749842
``Got no clue? Too bad for you.''
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
#2 lore raw
In reply to [email protected]

On Sun, 20 Jan 2002, Jasper Spaans wrote:

Hi Jasper,

Quoted 8 lines
Quoted 3 lines

However I do not notice much of a difference. While downloading some linux kernels a telnet session still slows down a lot :( Any ideas how this might be possible?

Yep, quite simple: your upstream provider is not shaping, hence the interactive traffic still needs to wait for the `big' packets from the download. However, your solution should help you when you're uploading lots of data. :)

Hmmm your answer seems to me logical but also depressing ;-) Thanx for explaining!

I will send an email to my provider to ask them if the would like to shape traffic for me. Not expecting any sensible answer of course :P

Best regards,

--
Ronald Verlaan
http://80.60.86.86
[email protected]
--------------------------------------------------------------------------
Mickey Mouse wears a Spiro Agnew watch.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/