Skip to contentSkip to conversation

unknown qdisc 'htb' ???

LARTC Patrick Van Acker 5 participants 7 messages Jan 23, 2002 – Feb 4, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

I'd like to try out HTB for traffic shaping.

I have a test machine with Redhat 7.2 (kernel 2.4.10), I've downloaded kernel 2.4.17, applied the patch from http://luxik.cdi.cz/~devik/qos/htb/,
recompiled the kernel (checked the option to use HTB in make menuconfig), and rebooted with the new kernel.

When I try to add some rules with HTB (f.i. tc qdisc add dev eth0 root handle 1: htb default 1:1 ), I got the following error message:
Unknown qdisc "htb", hence option "default" is unparsable

Obviously, this is not what I want :-)

What is going wrong here?

Regards,
Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 5 lines

I have a test machine with Redhat 7.2 (kernel 2.4.10), I've downloaded kernel 2.4.17, applied the patch from http://luxik.cdi.cz/~devik/qos/htb/,
recompiled the kernel (checked the option to use HTB in make menuconfig), and rebooted with the new kernel.

Quoted 7 lines

When I try to add some rules with HTB (f.i. tc qdisc add dev eth0 root handle 1: htb default 1:1 ), I got the following error message:
Unknown qdisc "htb", hence option "default" is unparsable

Obviously, this is not what I want :-)

What is going wrong here?

Have you patched and recompiled iproute2 ?

Stef

Signature · 7 lines
[email protected]
 More QOS info : http://www.docum.org/
 Title : "Using Linux as bandwidth manager"
     
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
#2 lore raw
In reply to Patrick Van Acker

Hi.
You are probably using an old version of tc,
try downloading the precompiled binary from the
htb site or get the sources at http://diffserv.sourceforge.net/

Patrick

Quoted 16 lines · Patrick Van Acker

Hello,

I'd like to try out HTB for traffic shaping.

I have a test machine with Redhat 7.2 (kernel 2.4.10), I've downloaded kernel 2.4.17, applied the patch from http://luxik.cdi.cz/~devik/qos/htb/,
recompiled the kernel (checked the option to use HTB in make menuconfig), and rebooted with the new kernel.

When I try to add some rules with HTB (f.i. tc qdisc add dev eth0 root handle 1: htb default 1:1 ), I got the following error message:
Unknown qdisc "htb", hence option "default" is unparsable

Obviously, this is not what I want :-)

Quoted 8 lines

What is going wrong here?

Regards,
Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

--

Computers are like air conditioners. They stop working when you open Windows.

--
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#3 lore raw
In reply to Patrick Van Acker

Hello,

Could you tell me how did you solve your problem?
I have exactly the same problem but with this configuration:
- linux 2.4.20 kernel, HTB option checked
- iproute2-2.4.7-now-ss010824.tar.gz installed, which is the latest version I found at ftp://ftp.sunet.se/pub/Linux/ip-routing/, except for "try" or "do not use" versions.
I guess I do not need patching iproute2 and I'm not using an old version of tc either.

Or am I wrong somewhere?

Br,
Emmanuel

Quoted 13 lines

Hello,

I'd like to try out HTB for traffic shaping.

I have a test machine with Redhat 7.2 (kernel 2.4.10), I've downloaded
kernel 2.4.17, applied the patch from http://luxik.cdi.cz/~devik/qos/htb/, <http://luxik.cdi.cz/%7Edevik/qos/htb/,>
recompiled the kernel (checked the option to use HTB in make menuconfig),
and rebooted with the new kernel.

When I try to add some rules with HTB (f.i. tc qdisc add dev eth0 root handle 1: htb default 1:1 ), I got the following error message:
Unknown qdisc "htb", hence option "default" is unparsable

Quoted 6 lines

Obviously, this is not what I want :-)

What is going wrong here?

Regards,
Patrick

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to Patrick Van Acker

On Tue, 4 Feb 2003 At 16:29 +0200, [email protected] Articulated:

Quoted 7 lines

Could you tell me how did you solve your problem?

Quoted 4 lines

When I try to add some rules with HTB (f.i. tc qdisc add dev eth0 root handle 1: htb default 1:1 ), I got the following error message:
Unknown qdisc "htb", hence option "default" is unparsable

Correct me if I'm wrong but I believe the "default" option requires a class not a parent:class combo. When I create an htb qdisc I use the command:

tc qdisc add dev eth1 root handle 1: htb default 40

but I suppose in your case you could use:

tc qdisc add dev eth1 root handle 1: htb default 1 // I've tried the above command and it returns just fine

peace

Signature · 11 lines
David DeLauro

Do not handicap your children by making their lives easy. - Robert Heinlein

When the World gains wisdom I will gain peace. - Id

When secrecy becomes a certain protection in whose shadow embryonic ideas are born and nurtured then it becomes indeed a sacred silence. For every form of life, from flower to very man himself, requires this fostering period of protected germination. - Rollin Malbone Pease

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#5 lore raw
In reply to Patrick Van Acker
Quoted 13 lines
Quoted 7 lines
Quoted 7 lines

When I try to add some rules with HTB (f.i. tc qdisc add dev eth0 root handle 1: htb default 1:1 ), I got the following error message:
Unknown qdisc "htb", hence option "default" is unparsable

Correct me if I'm wrong but I believe the "default" option requires a class not a parent:class combo. When I create an htb qdisc I use the command:

Quoted 7 lines

tc qdisc add dev eth1 root handle 1: htb default 40

but I suppose in your case you could use:

tc qdisc add dev eth1 root handle 1: htb default 1 // I've tried the above command and it returns just fine

Well, in fact my exact line is:
tc qdisc add dev eth1 root handle 1: htb default 12 So it's the same than yours (sorry I hadn't noticed the slight difference with Patrick's line) but it doesn't work. Thanks anyway.

Emmanuel

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#6 lore raw
In reply to Patrick Van Acker
Quoted 9 lines · Emmanuel Guiton

Hello,

Could you tell me how did you solve your problem?
I have exactly the same problem but with this configuration:
- linux 2.4.20 kernel, HTB option checked
- iproute2-2.4.7-now-ss010824.tar.gz installed, which is the latest
version I found at ftp://ftp.sunet.se/pub/Linux/ip-routing/, except for "try" or "do not use" versions. I guess I do not need patching iproute2 and I'm not using an old version of tc either.

You need to patch iproute2 for htb support. The patch can be found on the htb homepage. Or use the binary found on the htb homepage or go to www.docum.org. I have a tc binary on it with htb support on the download page.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/