Skip to contentSkip to conversation

tcpdump output --zebra ospfd

LARTC Sanjeev Lakshmanan 1 participant 1 message Jan 26, 2002

lore
Share & tools
lore
#0 lore raw

Dear Sir,

I have point-point ethernet connections to my linux boxes on which I am running Zebra OSPFD.

I am unable to understand the output of the tcpdump. Please clarify the terms in the output.

The output of the command tcpdump on BOX 1 is as
follows: I have also shown a part of my network below.

14:0831.849801 eth0 M 192.168.2.2 > 224.0.0.5: OSPF v2-hello 48: rtrid 192.168.4.2 backbone dr 192.168.2.1 bdr 192.168.2.1 [ttl1]

14:0831.849801 eth1 M 192.168.1.5 > 224.0.0.5: OSPF v2-hello 48: rtrid 192.168.7.5 backbone dr 192.168.1.5 bdr 192.168.1.1 [ttl1]

14:0831.849802 eth1 > 192.168.1.1 > 224.0.0.5: OSPF v2-hello 48: rtrid 192.168.2.1 backbone dr 192.168.1.5 bdr 192.168.1.1 [ttl1]

14:0831.849802 eth0 > 192.168.2.1 > 224.0.0.5: OSPF v2-hello 48: backbone dr 192.168.2.2 bdr 192.168.2.1 [ttl1]

---------- ----------------

|  BOX 2   |                        |     BOX 3     |
 ----------                          ---------------- 
eth0:192.168.1.2                    =eth0:192.168.1.5 
             =                                    =                    = 
               =                                  =                =  
                 =                               -------------------
     192.168.2.1|eth0  BOX 1     eth1|192.168.1.1
                 -------------------   

Regards,
Sanjeev.

__________________________________________________
Do You Yahoo!?
Great stuff seeking new owners in Yahoo! Auctions!
http://auctions.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/