SYN-DOS rate limit
Hello,
I have used the example found in SYN-DoS rate limit found in iproute examples directory. However I get the following error: RTNETLINK
answers: Invalid argument This is from calling the tc filter add dev eth0 parent ffff: protocol ip prio 50 handle 1 fw police rate 1kbit burst 40 mtu 9k drop flowid :1 command. Any ideas what I am doing wrong ? I did read the man page but it is not too informative.
Thanks,
Darko
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
probably FAQ .. did you compiled kernel with QoS enabled ?
Quoted 5 lines · Darko Koruga
examples directory. However I get the following error: RTNETLINK
answers: Invalid argument This is from calling the tc filter add dev eth0 parent ffff: protocol ip prio 50 handle 1 fw police rate 1kbit burst 40 mtu 9k drop flowid :1 command. Any ideas what I am doing wrong ? I did read the man page but it is not too informative.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 2 lines · On Thu, 31 Jan 2002 11:50:27 +0100 (CET) Martin Devera wrote:
probably FAQ .. did you compiled kernel with QoS enabled ?
I should bang my head against the wall. I thought I did but I forgot the option at the end of menuconfig. Recompiling now... Thanks for reminding me to check very basics first.
D.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 2 lines · On Thu, 31 Jan 2002 11:50:27 +0100 (CET) Martin Devera wrote:
probably FAQ .. did you compiled kernel with QoS enabled ?
Ok, now I definitely have QoS enabled. From .config file:CONFIG_NET_QOS=y
And I still get the same error.
D.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
So I suppose you enabled Ingress qdisc and policers too ? Then someone with policer/ingres experiance should interevent here .. Anybody ?
devik
Quoted 8 lines · Darko Koruga
Quoted 2 lines · On Thu, 31 Jan 2002 11:50:27 +0100 (CET) Martin Devera wrote:
probably FAQ .. did you compiled kernel with QoS enabled ?
Ok, now I definitely have QoS enabled. From .config file:
CONFIG_NET_QOS=y
And I still get the same error.
Quoted 7 lines
D.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/