simple traffic shaping problem
Hi All,
I read the advanced networking howto and find a useful way to shape my adsl link.
is says:
"tc qdisc add dev ppp0 root tbf rate 220kbit latency 50ms burst 1500
[...]
Change 220kbit to your uplinks *actual* speed, minus a few percent. If you have a really fast modem, raise 'burst' a bit. "
My adsl's upload brandwidth is about 120 kbits/sec, download brandwidth is about 384 kbits/sec.
So I use
tc qdisc add dev ppp0 root tbf rate 100kbit latency 50ms burst 1500
but after this command upload falls down to ~20-30 kbita/sec average. as I see in iptraf, the upload speed can reach the needed 100 kbits/sec but it 'hangs' very often.
can you help me with the right parameters?
thank you,
--+--BYE:-----# an FTC Handball Fan & #-------------- mailto:[email protected] | tel:+36-30-9480314 | icq:10257749 BME -= http://paha.hu && http://ftc.handball.hu =- INFO ---------------> a Debian Linux user <------PAHA--+--
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 7 lines · BAKONYI P?ter - paha
So I use
tc qdisc add dev ppp0 root tbf rate 100kbit latency 50ms burst 1500
but after this command upload falls down to ~20-30 kbita/sec average. as I see in iptraf, the upload speed can reach the needed 100 kbits/sec but it 'hangs' very often.
Raise latency too, 50ms*100kbit/sP00bitsb5 bytes, which is somewht less then a packet.
Quoted 1 line
can you help me with the right parameters?
I think this will help, but let us know!
Regards,
bert
Signature · 7 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk Netherlabs BV / Rent-a-Nerd.nl - Nerd Available - Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/