Skip to contentSkip to conversation

Best way to manage a 128Kb/s pipe - help

LARTC Steven Thompson 2 participants 2 messages Feb 5, 2002

lore
Share & tools
lore
#0 lore raw

Hi All

I have a 128Kbs internet connection used for in-coming and out-going traffic.

What tools do I need to manage the following services:
http, ssh (scp), ftp, streaming audio, smtp, instant messenger.

Q1. What is the best kernel to use at the moment and what other tools need to be installed.

Internet -------- eth0 | Linux fw | eth1 ----------- internal LAN

The Linux firewall will running the following : Squid, Posfix mail server and NATing for internal LAN.

Q2. How do divide the 128Kbs pipe so the following criteria is met:

All ssh sessions (no scp) - Min 10Kbs, but can burst to 128Kbs if
available
All scp or rsync uploads or downloads - Max 64Kbs , but can burst to
128Kbs if available (not sure what's best)
All icmp & udp DNS requests - Min 10Kbs , but can burst to 128Kbs if
available (not sure what's best)
All smtp incoming and out going - Max 64Kbs , but can burst to 128Kbs if
available (not sure what's best)
All http surfing and downloads - Max 64Kbs , but can burst to 128Kbs if
available (not sure what's best)
All ftp downloads and uploads - Max 64Kbs , but can burst to 128Kbs if
available (not sure what's best)
All steaming audio and video gets what left over, but can burst to 128Kbs
if available (not sure what's best)

Q3 I know squid can be set-up to limit bandwidth to a certain group or subnet ( i.e. 192.168.0.0/24 = max 64Kbs),
but as far as I know it can't be set up to burst to 128Kbs if it was
available. - Is the best option for HTTP limiting.

Q4. What is the best real time bandwidth usage tool. (i.e. I measure all incoming and out-going traffic on the
Internet interface (eth0) using "IPTRAF" which works great but is
there a real-time web interface or a better tool
than "Iptraf"

Thanks in Advance

Steven

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 7 lines · Steven Thompson

Hi All

I have a 128Kbs internet connection used for in-coming and out-going traffic.

What tools do I need to manage the following services:
http, ssh (scp), ftp, streaming audio, smtp, instant messenger.

Start reading the HOWTO :
http://ds9a.nl/2.4Routing/HOWTO/cvs/2.4routing/output/2.4routing-9.html

Quoted 3 lines

Q1. What is the best kernel to use at the moment and what other tools need to be installed.

I use kernel 2.4.9 and latest iproute2.

Quoted 8 lines

Internet -------- eth0 | Linux fw | eth1 ----------- internal LAN

The Linux firewall will running the following : Squid, Posfix mail server and NATing for internal LAN.

Q2. How do divide the 128Kbs pipe so the following criteria is met:

You can use HTB or CBQ and even add SFQ qdiscs and as filter u32 or fw.

Quoted 16 lines

All ssh sessions (no scp) - Min 10Kbs, but can burst to 128Kbs if
available
All scp or rsync uploads or downloads - Max 64Kbs , but can burst to
128Kbs if available (not sure what's best)
All icmp & udp DNS requests - Min 10Kbs , but can burst to 128Kbs if
available (not sure what's best)
All smtp incoming and out going - Max 64Kbs , but can burst to 128Kbs if
available (not sure what's best)
All http surfing and downloads - Max 64Kbs , but can burst to 128Kbs if
available (not sure what's best)
All ftp downloads and uploads - Max 64Kbs , but can burst to 128Kbs if
available (not sure what's best)
All steaming audio and video gets what left over, but can burst to 128Kbs
if available (not sure what's best)

Quoted 4 lines

Q3 I know squid can be set-up to limit bandwidth to a certain group or subnet ( i.e. 192.168.0.0/24 = max 64Kbs),
but as far as I know it can't be set up to burst to 128Kbs if it was
available. - Is the best option for HTTP limiting.

Question ?

Quoted 7 lines

Q4. What is the best real time bandwidth usage tool. (i.e. I measure all incoming and out-going traffic on the
Internet interface (eth0) using "IPTRAF" which works great but is
there a real-time web interface or a better tool
than "Iptraf"

I wrote a perl script : monitor.pl (can be found on www.docum.org).

Stef

Signature · 7 lines
[email protected]
 More QOS info : http://www.docum.org/
 Title : "Using Linux as bandwidth manager"
     
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/