Skip to contentSkip to conversation

Shaping multiple subnets that have same traffic types..

LARTC Daniel Platts 1 participant 1 message Feb 9, 2002

lore
Share & tools
lore
#0 lore raw

Hi All,

I have a box running as a bridge between our local network and the router which services the connections to our two branch offices. I want to shape the traffic going to the two branches, so that email and web surfing no longer hog the connection. I'm not 100% sure about the filter matching to use for the shaping though because both branches have the same traffic types, but are on two different subnets..

Branch 1 has a 64kbps link, while Branch 2 has 128kbps. The unusual figures I've given for the ceilings below are alowing for the compression in the routers (runs an average of about 1.3:1)

Diagram:

Local Network
(172.16.1.0)

                                                                    |
                                                                eth0
                                                    Linux Bridge/Shaper
                                                                eth1
                                                                    |
                                                               Router
                                                                |        |
                                                                /        \
                                                        64kbps    128kbps
                                                    172.16.2.0    172.16.3.0

The traffic classification I want is something like:

| root
(1:)

                                                                    |
                                                                    |
(1:1) 10Mbit
                                                                   /|\
                                                                  / | \
                                                                /   |   \
                                                              /(1:50)\
                                                            /              \
                                                1:10  /                  \
1:20
                                                        /\

/\
/ \ /
\
2:10 / \ /
\ 3:20

                                                             |           \
                                                    2:20 |            | 3:10

And the tc setup script would be something like:

TC=/sbin/tc
$TC qdisc del dev eth1 root 2>/dev/null >/dev/null $TC qdisc add dev eth1 root handle 1: htb default 50

$TC class add dev eth1 parent 1: classid 1:1 htb rate 10Mbit ceil 10Mbit burst 8k

$TC class add dev eth1 parent 1:1 classid 1:10 htb rate 64k ceil 88k burst 4k prio 1
$TC class add dev eth1 parent 1:1 classid 1:20 htb rate 128k ceil 168k burst 4k prio 1
$TC class add dev eth1 parent 1:1 classid 1:50 htb rate 32k ceil 48k burst 2k prio 1

$TC class add dev eth1 parent 1:10 classid 2:10 htb rate 48k ceil 72k burst 2k prio 1
$TC class add dev eth1 parent 1:10 classid 2:20 htb rate 16k ceil 36k burst 2k prio 2

$TC class add dev eth1 parent 1:20 classid 3:10 htb rate 96k ceil 144k burst 2k prio 1
$TC class add dev eth1 parent 1:20 classid 3:20 htb rate 32k ceil 56k burst 2k prio 2

$TC filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 172.16.2.0/24 flowid 1:10
$TC filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 172.16.3.0/24 flowid 1:20

$TC filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 172.16.2.0/24 match ip sport 3389 0xffff flowid 2:10
$TC filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 172.16.2.0/24 match ip dport 515 0xffff flowid 2:10
$TC filter add dev eth1 parent 1:0 protocol ip prio 2 u32 match ip dst 172.16.2.0/24 match ip sport 80 0xffff flowid 2:20
$TC filter add dev eth1 parent 1:0 protocol ip prio 2 u32 match ip dst 172.16.2.0/24 match ip sport 110 0xffff flowid 2:20
$TC filter add dev eth1 parent 1:0 protocol ip prio 2 u32 match ip dst 172.16.2.0/24 match ip sport 3128 0xffff flowid 2:20

$TC filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 172.16.3.0/24 match ip sport 3389 0xffff flowid 3:10
$TC filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 172.16.3.0/24 match ip dport 515 0xffff flowid 3:10
$TC filter add dev eth1 parent 1:0 protocol ip prio 2 u32 match ip dst 172.16.3.0/24 match ip sport 80 0xffff flowid 3:20
$TC filter add dev eth1 parent 1:0 protocol ip prio 2 u32 match ip dst 172.16.3.0/24 match ip sport 110 0xffff flowid 3:20
$TC filter add dev eth1 parent 1:0 protocol ip prio 2 u32 match ip dst 172.16.3.0/24 match ip sport 3128 0xffff flowid 3:20

Does this look right ?? Have I got this completely wrong ??
My only question is about the filters - if I attach them all to the root, then the first level filters are going to catch everything and I wont be able to split the traffic types off into the different speed bands.. Is it now possible to attach my 2nd level filters to the likes of 1:10 and 1:20 instead?? If so, then do I need to match the dst ip again or is that unneccessary?

Apologies for the long post.

Regards,
Daniel.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/