Skip to contentSkip to conversation

cbq.init stats

LARTC Oki DZ 2 participants 2 messages Feb 12, 2002

lore
Share & tools
lore

Oki DZ

author
#0 lore raw

Hi,

I have the following from the stats output:
/etc/init.d/cbq-init stats:
qdisc cbq 1: rate 100Mbit (bounded,isolated) prio no-transmit Sent 496117968 bytes 1239347 pkts (dropped 375122, overlimits 1233143) backlog 34p
borrowed 0 overactions 0 avgidle 62 undertime 0

It's the root, but yet, there are some overlimits.
What is the meaning of "overlimits?" I don't think you can go past the 100Mbps; it's the hardware speed.

Thanks in advance,
Oki

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 9 lines

/etc/init.d/cbq-init stats:
qdisc cbq 1: rate 100Mbit (bounded,isolated) prio no-transmit Sent 496117968 bytes 1239347 pkts (dropped 375122, overlimits 1233143) backlog 34p
borrowed 0 overactions 0 avgidle 62 undertime 0

It's the root, but yet, there are some overlimits.
What is the meaning of "overlimits?" I don't think you can go past the 100Mbps; it's the hardware speed.

this is stat for whole qdisc ? If yes there could have been some overlimits in lower classes ..
devik

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/