Skip to contentSkip to conversation

simple ipchain filter

LARTC chris 2 participants 3 messages Feb 14, 2002 – Feb 15, 2002

lore
Share & tools
lore

chris

author
#0 lore raw

I am new to the world of ipchains. I wanted to know if the following rule would deny all snmp traffic
on my Internet link(Serial4), but let me use snmp internally.
The problem is that with the latest bug in snmp, even shutting it off doesnt help in some cases. I also rely on snmp for network health info. I would like to just block all snmp traffic at the border. Since this linux router is acting as my border router, this seems to be the best place to start

ipchains -A input -i Serial4 -p udp -d 0/0 161 -j DENY --log ipchains -A input -i Serial4 -p udp -d 0/0 162 -j DENY --log

Is there a better way to stop all snmp traffic at the border?

Thanks,
Chris

#1 lore raw
Quoted 8 lines · chris

The problem is that with the latest bug in snmp, even shutting it off doesnt help in some cases. I also rely on snmp for network health info. I would like to just block all snmp traffic at the border. Since this linux router is acting as my border router, this seems to be the best place to start

ipchains -A input -i Serial4 -p udp -d 0/0 161 -j DENY --log ipchains -A input -i Serial4 -p udp -d 0/0 162 -j DENY --log

Looks good.

Signature · 7 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
author
#2 lore raw
In reply to chris

What I ended up doing was this:

# Disable snmp from the outside world
/sbin/ipchains -A input -i Serial4 -p udp -d 0/0 161:162 -j DENY --log

# This is an entry for my paranoia...
# If someone locally were running a socks server(for example), I wouldnt want the outside world

# to bounce off it and still gain entry. I lock down the eth0 to accept only
from my monitoring
# host.
/sbin/ipchains -A input -i eth0 -p udp -s ! my.good.host.local/32 -d 0/0
161:162 -j DENY --log

It seems to works fine with the tests I have made.

----- Original Message -----
From: "bert hubert" <[email protected]>
To: "chris" <[email protected]>
Cc: <[email protected]>
Sent: Friday, February 15, 2002 7:28 AM
Subject: Re: [LARTC] simple ipchain filter

Quoted 4 lines · chris
Quoted 3 lines

The problem is that with the latest bug in snmp, even shutting it off doesnt help in some cases. I also rely on snmp for network health info.

I

Quoted 1 line
Quoted 1 line

would like to just block all snmp traffic at the border. Since this

linux

Quoted 8 lines
Quoted 5 lines

router is acting as my border router, this seems to be the best place to start

ipchains -A input -i Serial4 -p udp -d 0/0 161 -j DENY --log ipchains -A input -i Serial4 -p udp -d 0/0 162 -j DENY --log

Looks good.

Quoted 9 lines

--
http://www.PowerDNS.com Versatile DNS Software & Services
http://www.tk the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/