Skip to contentSkip to conversation

problems with IMQ + Netfilter IP_LIMIT patch from netfilter CVS

LARTC Fabian Gervan 2 participants 3 messages Feb 14, 2002 – Feb 15, 2002

lore
Share & tools
lore
#0 lore raw

Martin:
I have problems after apply those patchs to kernel 2.4.17 "make modules" can't compile any "shed" modules. Here I write a fragment for iplimit.patch

+ * netfilter module to limit the number of parallel tcp
+ * connections per IP address.
+ * (c) 2000 Gerd Knorr <[email protected]>
+ *
+ * based on ...
+ *
+ * Kernel module to match connection tracking information.
+ * GPL (C) 1999 Rusty Russell ([email protected]).
+ */
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/list.h>
+#include <linux/netfilter_ipv4/ip_conntrack.h> +#include <linux/netfilter_ipv4/ip_conntrack_core.h> +#include <linux/netfilter_ipv4/ip_conntrack_tcp.h> +#include <linux/netfilter_ipv4/ip_tables.h>
+#include <linux/netfilter_ipv4/ipt_iplimit.h>
+
+#define DEBUG 0
+
+/* we'll save the tuples of all connections we care about */ +struct ipt_iplimit_conn
+{
+ struct list_head list;
+ struct ip_conntrack_tuple tuple;
+};
+
[...]
Could be that IMQ conflict with this patch, and make modules fail?

Signature · 7 lines
Saludos,
 Fabian Gervan


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
#1 lore raw

Re: [LARTC] problems with IMQ + Netfilter IP_LIMIT patch from

it is hard to say. you didn't included make output
so that I have no clue what's going on. Does it compile Without IMQ ?
devik

Quoted 33 lines · Fabian Gervan

Martin:
I have problems after apply those patchs to kernel 2.4.17 "make modules" can't compile any "shed" modules. Here I write a fragment for iplimit.patch

+ * netfilter module to limit the number of parallel tcp
+ * connections per IP address.
+ * (c) 2000 Gerd Knorr <[email protected]>
+ *
+ * based on ...
+ *
+ * Kernel module to match connection tracking information.
+ * GPL (C) 1999 Rusty Russell ([email protected]).
+ */

(quoted diff) +18 -0
+#include <linux/module.h>
+#include <linux/skbuff.h>
+#include <linux/list.h>
+#include <linux/netfilter_ipv4/ip_conntrack.h>
+#include <linux/netfilter_ipv4/ip_conntrack_core.h>
+#include <linux/netfilter_ipv4/ip_conntrack_tcp.h>
+#include <linux/netfilter_ipv4/ip_tables.h>
+#include <linux/netfilter_ipv4/ipt_iplimit.h>
+
+#define DEBUG 0
+
+/* we'll save the tuples of all connections we care about */
+struct ipt_iplimit_conn
+{
+        struct list_head list;
+       struct ip_conntrack_tuple tuple;
+};
+
[...]
Quoted 12 lines

Could be that IMQ conflict with this patch, and make modules fail?

Signature · 7 lines
Saludos,
 Fabian Gervan


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#2 lore raw
In reply to Fabian Gervan

Hello Martin,

MD> it is hard to say. you didn't included make output MD> so that I have no clue what's going on. Does it compile Without MD> IMQ ?
MD> devik
The problem is IPLIMIT PATCH+NEWNAT7, H323, (those annswer-me in the netfilter-devel list)
Now i am using IMQ (I turned off iplimit), it work very well, congratulations, but i have other problem:

Wipld (traffic monitor tool )don't show any information on eth0/1, ntop neigther.
Also i attemp to configure both programs tu get imq information:

# ntop -i imq
ntop: listening on imq
ntop: unknown physical layer type 0xffff

Any idea?

Signature · 7 lines
Best regards,
 Fabian                            mailto:[email protected]


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/