Skip to contentSkip to conversation

tc isn't working

LARTC Michel Angelo da Silva Pereira 2 participants 2 messages Feb 20, 2002

lore
Share & tools
lore
#0 lore raw

Hi all, I'm using this script to do some traffic control on my network. I wanna to limit the traffic to 64kb on my network interface that
goes to Internet, but the script isn't working.
When I try do to a download, the bandwidth goes to 11MB/s. The rule need to be added on the eth0 (outgoing traffic) or the
eth1 (incoming traffic from internet called inside).

Bye

Internet --> eth0 Linux eth1 --> Private Network.

tc qdisc add dev eth0 root handle 100: cbq bandwidth 1Mbit avpkt 1000

tc class add dev eth0 parent 100:0 classid 100:1 cbq bandwidth 10Mbit \
rate 64Kbit allot 1514 weight 6Kbit prio 8 maxburst 8 avpkt 1000 \
bounded

tc class add dev eth0 parent 100:1 classid 100:2 cbq bandwidth 64Kbit \
rate 32Kbit allot 1513 weight 2Kbit prio 5 maxburst 8 avpkt 1000

tc class add dev eth0 parent 100:1 classid 100:3 cbq bandwidth 64Kbit \
rate 32Kbit allot 1513 weight 2Kbit prio 5 maxburst 9 avpkt 1000

tc qdisc add dev eth0 parent 100:2 sfq quantum 1514b perturb 15 tc qdisc add dev eth0 parent 100:3 sfq quantum 1514b perturb 15

tc filter add dev eth0 parent 100:0 protocol ip prio 25 u32 match ip \
dst 192.168.0.2 flowid 100:2

tc filter add dev eth0 parent 100:0 protocol ip prio 25 u32 match ip \
dst 192.168.0.1 flowid 100:3

Signature · 10 lines
========================Netsite Internet Provider  -  +55(0xx16) 605-4000
Security Officer
Profissional Certificado Conectiva Linux
www.netsite.com.br/kidmumu - UIN 4553082-LC 83522
========================


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
#1 lore raw
Quoted 6 lines · Michel Angelo da Silva Pereira

Hi all, I'm using this script to do some traffic control on my network. I wanna to limit the traffic to 64kb on my network interface that
goes to Internet, but the script isn't working.
When I try do to a download, the bandwidth goes to 11MB/s. The rule need to be added on the eth0 (outgoing traffic) or the
eth1 (incoming traffic from internet called inside).

If you are in the private network, you need to shape traffic going out on eth1 to your private computer. Remember, you can only shape traffic *going* out!

Signature · 7 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
Linux Advanced Routing & Traffic Control: http://ds9a.nl/lartc
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/