Skip to contentSkip to conversation

Measuring Bw alloted in classes

LARTC Rajesh Revuru 2 participants 2 messages Feb 22, 2002

lore
Share & tools
lore
#0 lore raw

HI all..

Iam using tc for testing diffserv fucntionalites.

My basic interest is to allocate two classes for TCP and UDP and allot diff bw shares and test applying traffic generators.

Iam using CBQ as my queueing discipline...

tc qdisc add eth1 handle 10:root cbq allot 100Mb avpkt 100 bandwidth 100Mbit

Class 1:tc class add dev eth1 parent 10:1 root cbq weight 2 allot 40mb prio 2 avpkt 1000 rate 60mbit bandwidth 60mbit bounded isolated

Class 2:tc class add dev eth1 parent 10:2 root cbq weight 7 allot 30mb prio 7 avpkt 1000 rate 60mbit bandwidth 60mbit bounded isolated

filter 1:tc filter add dev eth1 prio 2 protocop ip root handle 1 fw classid 10:1

filter 2:tc filter add dev eth1 prio 7 protocop ip root handle 2 fw classid 10:2

ipchains -I output1 -p tcp -m 1

ipchains -I output2 -p udp -m 2

Question 1:

My intention is to apply a class.1 to TCP traffic class no.2 to UDP traffic. Is that acheived? Iam using Iptraf to check the statistics at the interfaces.. but i see a little difference

Question 2:

Is there any way where i can check the bw alloted to diff classes graphically or by numbers?

Thanks for your help in advance

---------------------------------
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games

#1 lore raw
Quoted 21 lines · Rajesh Revuru

HI all..

Iam using tc for testing diffserv fucntionalites.

My basic interest is to allocate two classes for TCP and UDP and allot diff bw shares and test applying traffic generators.

Iam using CBQ as my queueing discipline...

tc qdisc add eth1 handle 10:root cbq allot 100Mb avpkt 100 bandwidth 100Mbit

Class 1:tc class add dev eth1 parent 10:1 root cbq weight 2 allot 40mb prio 2 avpkt 1000 rate 60mbit bandwidth 60mbit bounded isolated

Class 2:tc class add dev eth1 parent 10:2 root cbq weight 7 allot 30mb prio 7 avpkt 1000 rate 60mbit bandwidth 60mbit bounded isolated

filter 1:tc filter add dev eth1 prio 2 protocop ip root handle 1 fw classid 10:1

Quoted 6 lines

filter 2:tc filter add dev eth1 prio 7 protocop ip root handle 2 fw classid 10:2

ipchains -I output1 -p tcp -m 1

ipchains -I output2 -p udp -m 2

FIrst of all, the bandwith of the classes attacjed to a qdisc must be the same. So in your cas 100mbit.
Second, you need to create a bounded class and attach it to the root qdisc with rate = bandwith. Attach both other class to this class in stead of the root qdisc.
And don't use the isolated parameter. It's not working.
And take weight = rate /10.

Quoted 5 lines

Question 1:

My intention is to apply a class.1 to TCP traffic class no.2 to UDP traffic. Is that acheived? Iam using Iptraf to check the statistics at the interfaces.. but i see a little difference

The filters and ipchains commands are OK.

Quoted 4 lines

Question 2:

Is there any way where i can check the bw alloted to diff classes graphically or by numbers?

I have some scripts on www.docum.org. First script is monitor.pl and it gives a real time bandwith usage of the classes (it uses the byte counters of iptables/ipchains and not the output of the tc command). I have a web-interface example here : http://qos.dyndns.org:8080/cgi-bin/monitor.pl
I have also a version that can be used in a terminal.

I also wrote a new script. It uses the
output of tc and rrd to create
some graphs (http://home.docum.org/stef.coene/qos/gui/rrd.html).

Hope this helps

Stef

Signature · 6 lines
[email protected]
 More QOS info : http://www.docum.org/
 Title : "Using Linux as bandwidth manager"
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/