CBQ delay messages
Hi,
I have an ADSL connection (PPPOE via rp-pppoe) and currently I am using the Ultimate Script from the Howto. Recently these messages started to show up. What is the problem and where can I find more info to correct this
Signature · 22 lines
Togan Muftuoglu Unusual System Events =-=-=-=-=-=-=-=-=-=-Feb 23 20:00:04 gardiyan kernel: CBQ delay 207210 > 10sec Feb 23 20:00:04 gardiyan kernel: CBQ delay 207174 > 10sec Feb 23 20:00:04 gardiyan last message repeated 2 times Feb 23 20:00:05 gardiyan kernel: CBQ delay 207108 > 10sec Feb 23 20:00:06 gardiyan kernel: CBQ delay 207007 > 10sec Feb 23 20:00:08 gardiyan kernel: CBQ delay 206870 > 10sec Feb 23 20:00:09 gardiyan kernel: CBQ delay 206671 > 10sec Feb 23 20:00:09 gardiyan last message repeated 2 times Feb 23 20:00:11 gardiyan kernel: CBQ delay 206471 > 10sec Feb 23 20:00:16 gardiyan kernel: NET: 4 messages suppressed. Feb 23 20:00:16 gardiyan kernel: CBQ delay 206070 > 10sec Feb 23 20:00:19 gardiyan kernel: NET: 5 messages suppressed. Feb 23 20:00:19 gardiyan kernel: CBQ delay 205692 > 10sec _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 6 lines · Togan Muftuoglu
Hi,
I have an ADSL connection (PPPOE via rp-pppoe) and currently I am using the Ultimate Script from the Howto. Recently these messages started to show up. What is the problem and where can I find more info to correct this
What kind of bandwidth do you have it configured for?
Regards,
bert
Signature · 6 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 1 line · bert hubert;
What kind of bandwidth do you have it configured for?
# The Ultimate Setup For Your Internet Connection At Home #
#
# Set the following values to somewhat less than your actual download
# and uplink speed. In kilobits actual is 256/64 using 240/60 DOWNLINK$0 UPLINK` TC=/usr/sbin/tc
Signature · 5 lines
Togan Muftuoglu _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 11 lines · Togan Muftuoglu
Quoted 1 line · bert hubert;
What kind of bandwidth do you have it configured for?
# The Ultimate Setup For Your Internet Connection At Home #
#
# Set the following values to somewhat less than your actual download# and uplink speed. In kilobits actual is 256/64 using 240/60 DOWNLINK$0 UPLINK` TC=/usr/sbin/tc
Weird. This message indicates that CBQ calculated how long it had to throttle itself, and that the calculation was very bogus. Devik, the HTB guy, is an expert in these things.
Normally CBQ doesn't show these errors though. Devik?
Regards,
bert
Signature · 6 lines
http://www.PowerDNS.com Versatile DNS Software & Services http://www.tk the dot in .tk http://lartc.org Linux Advanced Routing & Traffic Control HOWTO _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 4 lines · bert hubert;
Weird. This message indicates that CBQ calculated how long it had to throttle itself, and that the calculation was very bogus. Devik, the HTB guy, is an expert in these things.
I am using the script with kernel 2.2-19 (SuSE precompiled kernel) ( The box is the firewall/proxy machine for the DMZ and Local Lan, and this is the first time I ever got a warning on CBQ. The script is the same the connection speed is the same actually everything is the same. The ADSL link is static and if the Telecom does not f...k the connection stays 5-6 days and for some reason I have not figured the Telecom resets the connection which is up again in a 5 secs.
The only thing I have noticed is the amount of Nimda requests has increased for the last week and the last 4 days it has been pain with the Turkish websites which I had to block them all as networks of /16 or /23. Being a Turk I find this a bit of irony -:)
--
Togan Muftuoglu
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
I don't know the Ultimate script but should not it be DOWNLINK$0kbit
?
Attach please tc -s -d class show dev XXX output ... Probably you set too small bandwidth (Bert is probably thinking about the same reason :)
devik
Quoted 20 lines · Togan Muftuoglu
Quoted 1 line · bert hubert;
What kind of bandwidth do you have it configured for?
# The Ultimate Setup For Your Internet Connection At Home #
#
# Set the following values to somewhat less than your actual download# and uplink speed. In kilobits actual is 256/64 using 240/60 DOWNLINK$0 UPLINK` TC=/usr/sbin/tcSignature · 5 lines
Togan Muftuoglu _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 9 lines
Quoted 3 lines
DOWNLINK$0
UPLINK`
TC=/usr/sbin/tcWeird. This message indicates that CBQ calculated how long it had to throttle itself, and that the calculation was very bogus. Devik, the HTB guy, is an expert in these things.
Normally CBQ doesn't show these errors though. Devik?
Ehh I replied to prev post before seeing this one :) Yes it should not display them. There is only reason - too small rate or too big minburst ..
I suggested the original poster to send us tc -s class show, then we will see :)
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Quoted 7 lines · Martin Devera;
I don't know the Ultimate script but should not it be DOWNLINK$0kbit
?
Attach please tc -s -d class show dev XXX output ... Probably you set too small bandwidth (Bert is probably thinking about the same reason :)
devik
here is the output tc -s -d class show dev ppp0
class cbq 1: root rate 10Mbit cell 8b (bounded,isolated) prio no-transmit/8 weight 10Mbit allot 1492b level 2 ewma 5 avpkt 1000b maxidle 23us
Sent 145 bytes 3 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:10 parent 1:1 leaf 10: rate 480Kbit cell 8b prio 1/1 weight 480Kbit allot 1600b level 0 ewma 5 avpkt 1000b maxidle 23us
Sent 2684590 bytes 49302 pkts (dropped 0, overlimits 1902)
borrowed 0 overactions 291 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 480Kbit cell 8b (bounded,isolated) prio \
5/5 weight 480Kbit allot 1500b level 1 ewma 5 avpkt 1000b maxidle 23us
Sent 6702161 bytes 78268 pkts (dropped 0, overlimits 0)
borrowed 39 overactions 0 avgidle 624 undertime 0
class cbq 1:20 parent 1:1 leaf 20: rate 432Kbit cell 8b prio 2/2 weight 432Kbit allot 1600b level 0 ewma 5 avpkt 1000b maxidle 23us
Sent 4017571 bytes 28966 pkts (dropped 0, overlimits 2083)
borrowed 39 overactions 553 avgidle 624 undertime 0
Signature · 5 lines
Togan Muftuoglu _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
Well, it is not the case. :-[ Here I have to say that I have no idea. The only way will be massive debugging. All setting seems to be ok except maxidle 23us which seems to be too small. But not neccessarily .. with this high speed.
Seems like next candidate to cbq's list of weird behaviour :(
devik
Quoted 23 lines
Quoted 4 lines
Attach please tc -s -d class show dev XXX output ... Probably you set too small bandwidth (Bert is probably thinking about the same reason :)
devikhere is the output tc -s -d class show dev ppp0
class cbq 1: root rate 10Mbit cell 8b (bounded,isolated) prio no-transmit/8 weight 10Mbit allot 1492b level 2 ewma 5 avpkt 1000b maxidle 23us
Sent 145 bytes 3 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0class cbq 1:10 parent 1:1 leaf 10: rate 480Kbit cell 8b prio 1/1 weight 480Kbit allot 1600b level 0 ewma 5 avpkt 1000b maxidle 23us
Sent 2684590 bytes 49302 pkts (dropped 0, overlimits 1902)
borrowed 0 overactions 291 avgidle 624 undertime 0class cbq 1:1 parent 1: rate 480Kbit cell 8b (bounded,isolated) prio \
5/5 weight 480Kbit allot 1500b level 1 ewma 5 avpkt 1000b maxidle 23us
Sent 6702161 bytes 78268 pkts (dropped 0, overlimits 0)
borrowed 39 overactions 0 avgidle 624 undertime 0
Quoted 13 lines
class cbq 1:20 parent 1:1 leaf 20: rate 432Kbit cell 8b prio 2/2 weight 432Kbit allot 1600b level 0 ewma 5 avpkt 1000b maxidle 23us
Sent 4017571 bytes 28966 pkts (dropped 0, overlimits 2083)
borrowed 39 overactions 553 avgidle 624 undertime 0Signature · 5 lines
Togan Muftuoglu _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/