Skip to contentSkip to conversation

measuring queueing delay using iproute2

LARTC Radhakrishnan Vijay 3 participants 3 messages Feb 27, 2002

lore
Share & tools
lore
#0 lore raw

I am using the tc functionality provided by iproute2 to setup classes and queueing disciplines. I have a requirement to determine the queueing delay of each packet belonging to a particular class so that i can measure the average queueing delay over a time interval for a particular traffic class. I would be grateful if somebody could give me pointers on how i possibly can achieve this. I suspect that i would have to modify the source code of iproute2 , but am not too sure on what segment of the code i should be modifying.

__________________________________________________
Do You Yahoo!?
Yahoo! Greetings - Send FREE e-cards for every occasion!
http://greetings.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/

#1 lore raw
Quoted 11 lines · Radhakrishnan Vijay

I am using the tc functionality provided by iproute2 to setup classes and queueing disciplines. I have a requirement to determine the queueing delay of each packet belonging to a particular class so that i can measure the average queueing delay over a time interval for a particular traffic class. I would be grateful if somebody could give me pointers on how i possibly can achieve this. I suspect that i would have to modify the source code of iproute2 , but am not too sure on what segment of the code i should be modifying.

Right now the actual delay is not measured by the kernel, so I don't see how you would get at it. You could calculate the effective class bandwidth and multiply that by the average qlength, but that would be pretty indirect.

Regards,

bert

Signature · 6 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
#2 lore raw
In reply to Radhakrishnan Vijay

you have to modify kernel code ;) Add one field into sk_buff and initialize it with TSC at recieve. Then in global dequeue in sch_generic.c IIRC you can compute delay and either prinkt or average it directly in kernel.
devik

Quoted 11 lines · Radhakrishnan Vijay

I am using the tc functionality provided by iproute2 to setup classes and queueing disciplines. I have a requirement to determine the queueing delay of each packet belonging to a particular class so that i can measure the average queueing delay over a time interval for a particular traffic class. I would be grateful if somebody could give me pointers on how i possibly can achieve this. I suspect that i would have to modify the source code of iproute2 , but am not too sure on what segment of the code i should be modifying.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/