Problems with filters & PRIO
Hi,
I have a colocated server with a bandwidth limitation, so I want to throttle the maximum output to 256k, and use a PRIO with SFQ inside this, so I'm using the following:
tc qdisc add dev eth0 root handle 1: htb default 1
tc class add dev eth0 parent 1: classid 1:1 htb rate 256kbit burst 15k tc qdisc add dev eth0 parent 1:1 handle 10: prio
tc qdisc add dev eth0 parent 10:1 handle 11: sfq
tc qdisc add dev eth0 parent 10:2 handle 12: sfq
tc qdisc add dev eth0 parent 10:3 handle 13: sfq
This all works fine, ssh traffic falls straight into 11:, and scp traffic into 13:, everything else into 12:.
My problems come when I try to filter outbound traffic from port80 into 13: (the lowpriority band).
This doesn't work:
tc filter add dev eth0 parent 1: protocol ip prio 10 u32 match ip sport 80 0xffff flowid 13:
nor does:
tc filter add dev eth0 parent 1: protocol ip prio 10 u32 match ip sport 80 0xffff flowid 10:3
nor does:
iptables -t mangle -A OUTPUT -p TCP --sport 80 -j TOS --set-tos Maximize-Throughput (the packet counters against the ruleset go up, but not the ones in the tc -s qdisc)
I also tried this with FORWARD & POSTROUTING, also no joy.
Interestingly it /does/ work if (and only if) I set the TOS in the PREROUTING mangle chain on a firewall with these rules - but I can't do this with my colo box.
Any ideas?
- Rob.
Signature · 2 lines
Robert Collier [email protected]
Quoted 10 lines
tc qdisc add dev eth0 root handle 1: htb default 1
tc class add dev eth0 parent 1: classid 1:1 htb rate 256kbit burst 15k tc qdisc add dev eth0 parent 1:1 handle 10: prio
tc qdisc add dev eth0 parent 10:1 handle 11: sfq
tc qdisc add dev eth0 parent 10:2 handle 12: sfq
tc qdisc add dev eth0 parent 10:3 handle 13: sfqThis all works fine, ssh traffic falls straight into 11:, and scp traffic into 13:, everything else into 12:.
Quoted 6 lines
My problems come when I try to filter outbound traffic from port80 into 13: (the lowpriority band).
This doesn't work:
tc filter add dev eth0 parent 1: protocol ip prio 10 u32 match ip sport 80
0xffffflowid 13:
try tc filter add dev eth0 parent 10: protocol ip prio 10 u32 match ip sport 80 0xffff flowid 10:3
devik
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Martin Devera
try tc filter add dev eth0 parent 10: protocol ip prio 10 u32 match ip sport 80
0xffffflowid 10:3
Thanks, this seems to be working!
frivolous:~# tc -s qdisc show dev eth0 qdisc sfq 13: quantum 1514b Sent 1050040 bytes 1170 pkts (dropped 0, overlimits 0) [...]
I'm having trouble listing the filter though:
frivolous:~# tc filter show dev eth0 frivolous:~#
I'm also still really interested to find out why setting the TOS in PREROUTING works, but not setting it in OUTPUT, FORWARD or POSTROUTING.
- Rob.
Signature · 2 lines
Robert Collier [email protected]