bandwidth shaping problem...
Quoted 11 lines · you
Stef Coene([email protected])@Mon, Mar 04, 2002 at 01:57:50PM +0100:
Quoted 7 lines · Rajesh Revuru
Quoted 4 lines
ipchains -N
acc_0
ipchains -Nacc_1
ipchains -A output -jacc_0-p tcp -m 1
ipchains -A output -jacc_1-p tcp -m 1Mhh, I think I know where these commands are from :)
shouldnt that last ipchains command be:
ipchains -A output -jacc_1-p udp -m 2
Yep :) At least if you want to match udp.
Stef
Signature · 6 lines
[email protected] More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi,
This is a simple and straight configuration, but iam not able to acheive what i wanted to test.
Please help with the script.
|--------| |---------| |--------| |-------| | src |-----| router1 |----|router2 |-----|dest | |--------| |---------| |--------| |-------|
Test i wanted to do:
Send(using traffic generator)
TCP traffic 5mb
UDP traffic 3mb.
At the destination
To get
TCP traffic 3mb.
UDP traffic 1mb.
Iam trying to apply the traffic shaping at the eth1 of the router 2.
I wanted to create two classes and of rate=3mb for tcp 1mb for udp.I am trying to use the filter with fw options.
**************** script start*****************
tc qdisc add dev eth1 root 10: cbq bandwidth 100mb avpkt 1000
tc class add parent 10: classid 10:1 cbq bandwidth 100mb rate 8mb bounded.
tc qdisc add dev eth1 parent 10:1 handle 20: cbq bandwidth 8mb avpkt 1000
tc class add dev eth1 parent20: classid 20:1 cbq bandwidth 8mb rate 5mb prio 3
tc class add dev eth1 parent20: classid 20:2 cbq bandwidth 8mb rate 3mb prio 5
tc filter add parent 20:protocol ip prio 3 handle 1 fw classid 20:1
tc filter add parent 20:protocol ip prio 3 handle 2 fw classid 20:2
ipchains -N acc_0
ipchains -N acc_1
ipchains -A output -j acc_0 -p tcp -m 1
ipchains -A output -j acc_1 -p tcp -m 1
********************end script **************
I guess there something wrong with the filtering and ipchains section...
Can anyone please suggest me to fix the problem
Thanks
RR
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - sign up for Fantasy Baseball
http://sports.yahoo.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 23 lines · Rajesh Revuru
Hi,
This is a simple and straight configuration, but iam not able to acheive what i wanted to test.Please help with the script.
|--------| |---------| |--------| |-------| | src |-----| router1 |----|router2 |-----|dest | |--------| |---------| |--------| |-------|Test i wanted to do:
Send(using traffic generator)
TCP traffic 5mb
UDP traffic 3mb.At the destination
To get
TCP traffic 3mb.
UDP traffic 1mb.
Quoted 6 lines
Iam trying to apply the traffic shaping at the eth1 of the router 2.
I wanted to create two classes and of rate=3mb for tcp 1mb for udp.I am trying to use the filter with fw options.
You attached a cbq qdisc to class, bad idea :)
I hope this script does what you want to do (it gives 3 mb to tcp and 1 mb to udp. Both udp and tcp can get 4 mb if there is no other traffic) :
tc qdisc add dev eth1 root 10: cbq bandwidth 100mb avpkt 1000
tc class add parent 10: classid 10:1 cbq bandwidth 100mb rate 4mb bounded.
tc class add dev eth1 parent 10:1 classid 10:10 cbq bandwidth 100mb rate 3mb prio 3
tc class add dev eth1 parent 10:1 classid 10:20 cbq bandwidth 100mb rate 1mb prio 5
tc filter add parent 10: protocol ip prio 3 handle 1 fw classid 10:10
tc filter add parent 10: protocol ip prio 3 handle 2 fw classid 10:20
Quoted 4 lines
ipchains -N
acc_0
ipchains -Nacc_1
ipchains -A output -jacc_0-p tcp -m 1
ipchains -A output -jacc_1-p tcp -m 1
Mhh, I think I know where these commands are from :)
Stef
--
[email protected]
More QOS info : http://www.docum.org/
Title : "Using Linux as bandwidth manager"
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Stef Coene([email protected])@Mon, Mar 04, 2002 at 01:57:50PM +0100:
Quoted 7 lines · Rajesh Revuru
Quoted 5 lines
ipchains -N
acc_0
ipchains -Nacc_1
ipchains -A output -jacc_0-p tcp -m 1
ipchains -A output -jacc_1-p tcp -m 1Mhh, I think I know where these commands are from :)
shouldnt that last ipchains command be:
ipchains -A output -j acc_1 -p udp -m 2
Signature · 9 lines
PGP key: http://codex.net/pgp/pgp.asc Physics is not a religion. If it were, we'd have a much easier time raising money -- Leon Lederman _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/