Skip to contentSkip to conversation

icmp bandwidth restriction !!

LARTC Arindam Haldar 1 participant 3 messages Mar 6, 2002 – Mar 7, 2002

lore
Share & tools
lore
#0 lore raw

hi all

i want help in managing icmp traffic. this is what i tried --> iptables -t mangle -A PREROUTING -d 10.0.0.0/8 -p 1 -j MARK --set-mark 4001

tc filter add dev eth4 parent 5:0 match protocol ip 1 prio 2 handle 4001 fw classid 5:105

i tried permutaion of >> match protocol ip 1 << but always getting different errors.

i want to know whats the syntax for tc when i mark packets with iptables of icmp type !
iptables -nvL PREROUTING -t mangle does shows figures indicating icmp packets r inded being marked !

thanx in advance
A.H

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 19 lines · eth
Quoted 7 lines · Arindam Haldar

i want help in managing icmp traffic. this is what i tried --> iptables -t mangle -A PREROUTING -d 10.0.0.0/8 -p 1 -j MARK --set-mark 4001

tc filter add dev eth4 parent 5:0 match protocol ip 1 prio 2 handle 4001 fw classid 5:105

Quoted 6 lines

i tried permutaion of >> match protocol ip 1 << but always getting different errors.
i want to know whats the syntax for tc when i mark packets with iptables of icmp type !
iptables -nvL PREROUTING -t mangle does shows figures indicating icmp packets r inded being marked !

If only ICMP is the criterion why bother with iptables? Afterwall the u32 filter of tc can match pretty anything in terms of tcp/ip...

Quoted 7 lines

If I'm not wrong for example

tc filter add dev eth1 protocol ip parent 5:0 prio 2 match ip dst 10.0.0.0/8 match ip protocol 1 0xff flowid 5:105

... would create a filter to match all ICMP traffic destined to 10.0.0.0

# tc filter add dev eth4 parent 5:0 protocol ip prio 2 match ip dst 
10.0.0.0/8 match ip protocol 1 0xff flowid 5:105
Unknown filter "match", hence "ip" is unparsable

A.H

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Arindam Haldar
Quoted 27 lines · Arindam Haldar
Quoted 25 lines · eth
Quoted 7 lines · Arindam Haldar

i want help in managing icmp traffic. this is what i tried --> iptables -t mangle -A PREROUTING -d 10.0.0.0/8 -p 1 -j MARK --set-mark 4001

tc filter add dev eth4 parent 5:0 match protocol ip 1 prio 2 handle 4001 fw classid 5:105

Quoted 6 lines

i tried permutaion of >> match protocol ip 1 << but always getting different errors.
i want to know whats the syntax for tc when i mark packets with iptables of icmp type !
iptables -nvL PREROUTING -t mangle does shows figures indicating icmp packets r inded being marked !

If only ICMP is the criterion why bother with iptables? Afterwall the u32 filter of tc can match pretty anything in terms of tcp/ip...

If I'm not wrong for example

tc filter add dev eth1 protocol ip parent 5:0 prio 2 match ip dst 10.0.0.0/8 match ip protocol 1 0xff flowid 5:105

Quoted 9 lines
Quoted 2 lines

... would create a filter to match all ICMP traffic destined to 10.0.0.0

# tc filter add dev eth4 parent 5:0 protocol ip prio 2 match ip dst 
10.0.0.0/8 match ip protocol 1 0xff flowid 5:105
Unknown filter "match", hence "ip" is unparsable

A.H

I AM EXTREMLY SORRY !! ... didnt add u32 to the above !.. :-(

thanx 4 ur help !

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/