Skip to contentSkip to conversation

Simple Beginner Question - allocating 64k

LARTC Carl Spies 4 participants 5 messages Mar 7, 2002

lore
Share & tools
lore

Carl Spies

author
#0 lore raw

Hi there

Please be patient - I'm a newbie at this.

Have an internet connection on eth0 - 64K
so eth0 = 216.139.165.7
and eth1 = 192.168.0.1

have 4 pcs connected to a hub on eth1
the pc's are 192.168.0.11 and 22 and 33 and 44

I want to allocate  4kb to 192.168.0.11
               and  4kb to 192.168.0.22
               and  8kb to 192.168.0.33
               and 32kb	to 192.168.0.44

so this is a total of 48kb and the rest is used on the server 10.0.0.80

Also - want to make sure that 192.168.0.11 never takes more than 4kb at any time.

No fancy stuff like separating http and smtp and things.

What's the simple most elegant way of doing this on eth1.

Signature · 16 lines
Warm regards
Carl

DAANET
9 Pelewura Crescent, Apapa, Lagos, Nigeria
T - +234-1-587-8247
F - +234-1-587-8210
M - +234-803-465-4689 

"There are two major products that came out of Berkeley: LSD and Unix. We 
don't believe this to be a coincidence." - Jeremy S. Anderson


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
author
#1 lore raw
Quoted 6 lines · Greg Scott

How can your internal server be 10.0.0.80 when the rest of your internal LAN is 192.168.0.nnn?
- Greg
(Hoping I didn't put my foot in my mouth again)

so this is a total of 48kb and the rest is used on the server 10.0.0.80

                                               /me nobraining   ^^^^^^^^^

Yipes sorry - you're right - I meant 192.168.0.1

(it's 3am and i'm only knitting with one needle) :)

So please be nice :)

Warm regards
DAANET
9 Pelewura Crescent, Apapa, Lagos, Nigeria
T - +234-1-587-8247
F - +234-1-587-8210
M - +234-803-465-4689

"There are two major products that came out of Berkeley: LSD and Unix. We don't believe this to be a coincidence." - Jeremy S. Anderson

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw
In reply to Carl Spies

How can your internal server be 10.0.0.80 when the rest of your internal LAN is 192.168.0.nnn?

- Greg
(Hoping I didn't put my foot in my mouth again)

-----Original Message-----
From: Carl Spies [mailto:[email protected]]
Sent: Wednesday, March 06, 2002 7:08 PM
To: [email protected]
Subject: [LARTC] Simple Beginner Question - allocating 64k

Hi there

Please be patient - I'm a newbie at this.

Have an internet connection on eth0 - 64K
so eth0 = 216.139.165.7
and eth1 = 192.168.0.1

have 4 pcs connected to a hub on eth1
the pc's are 192.168.0.11 and 22 and 33 and 44

I want to allocate  4kb to 192.168.0.11
               and  4kb to 192.168.0.22
               and  8kb to 192.168.0.33
               and 32kb	to 192.168.0.44

so this is a total of 48kb and the rest is used on the server 10.0.0.80

Also - want to make sure that 192.168.0.11 never takes more than 4kb at any time.

No fancy stuff like separating http and smtp and things.

What's the simple most elegant way of doing this on eth1.

Signature · 19 lines
Warm regards
Carl

DAANET
9 Pelewura Crescent, Apapa, Lagos, Nigeria
T - +234-1-587-8247
F - +234-1-587-8210
M - +234-803-465-4689 

"There are two major products that came out of Berkeley: LSD and Unix. We 
don't believe this to be a coincidence." - Jeremy S. Anderson


_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Carl Spies
Quoted 12 lines

Have an internet connection on eth0 - 64K so eth0 = 216.139.165.7
and eth1 = 192.168.0.1

have 4 pcs connected to a hub on eth1 the pc's are 192.168.0.11 and 22 and 33 and 44

I want to allocate  4kb to 192.168.0.11
               and  4kb to 192.168.0.22
               and  8kb to 192.168.0.33
               and 32kb	to 192.168.0.44
Quoted 8 lines

so this is a total of 48kb and the rest is used on the server 10.0.0.80

Also - want to make sure that 192.168.0.11 never takes more than 4kb at any time.

No fancy stuff like separating http and smtp and things.

What's the simple most elegant way of doing this on eth1.

Create a HTB qdisc, add a ceiled class of 64K, add 5 classes with the appropriated rate (4 for the LAN's : 4,4,8,32 kb and 1 for the server 16kb)
with ceil = 64kb. But ceil 192.68.0.11 to 4kbit. Mark the packets on eht1
for all ip's with a different mark and use the fw filter on eth0 to put the traffic in the right class.
You can do the same with CBQ of you want. You need to patch the kernel before you can use the HTB qdisc.

Stef

Signature · 6 lines
[email protected]
 More QOS info : http://www.docum.org/
 Title : "Using Linux as bandwidth manager"
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#4 lore raw
In reply to Carl Spies
Quoted 8 lines · Carl Spies
Quoted 1 line

have 4 pcs connected to a hub on eth1

the pc's are 192.168.0.11 and 22 and 33 and 44

I want to allocate 4kb to 192.168.0.11

              and  4kb to 192.168.0.22
              and  8kb to 192.168.0.33
              and 32kb	to 192.168.0.44
Quoted 9 lines

so this is a total of 48kb and the rest is used on the server 10.0.0.80

Also - want to make sure that 192.168.0.11 never takes more than 4kb at any time.

No fancy stuff like separating http and smtp and things.

What's the simple most elegant way of doing this on eth1.

Here is an addapt of my script but you'll have to compile htb into the kernel and iproute2; see also

http://luxik.cdi.cz/~devik/qos/htb/htbman.htm

qdisc->class_limit_48---class 1 4 Kb -> qdisc sfq

                                       \_class 2   4 Kb -> qdisc sfq
                                       \_class 3   8 Kb -> qdisc sfq
                                        \_class 4  32 Kb -> qdisc sfq

... tc filter to put IP in classes. It should go like this:

tc qdisc add dev eth1 root handle 1: htb default 10

tc class add dev eth1 parent 1: classid 1:1 htb rate 48kbit ceil 48kbit burst 1k

tc class add dev eth1 parent 1:1 classid 1:10 htb rate 4kbit ceil 48kbit burst 1k
tc class add dev eth1 parent 1:1 classid 1:11 htb rate 4kbit ceil 48kbit burst 1k
tc class add dev eth1 parent 1:1 classid 1:12 htb rate 8kbit ceil 48kbit burst 1k
tc class add dev eth1 parent 1:1 classid 1:14 htb rate 32kbit ceil 48kbit burst 1k

tc qdisc add dev eth1 parent 1:10 handle 20: sfq perturb 10 tc qdisc add dev eth1 parent 1:11 handle 30: sfq perturb 10 tc qdisc add dev eth1 parent 1:12 handle 40: sfq perturb 10 tc qdisc add dev eth1 parent 1:14 handle 50: sfq perturb 10

tc filter add dev eth1 protocol ip parent 1:0 prio 1 u32 match ip dst 192.168.0.11 flowid 1:10
tc filter add dev eth1 protocol ip parent 1:0 prio 1 u32 match ip dst 192.168.0.22 flowid 1:11
tc filter add dev eth1 protocol ip parent 1:0 prio 1 u32 match ip dst 192.168.0.33 flowid 1:12
tc filter add dev eth1 protocol ip parent 1:0 prio 1 u32 match ip dst 192.168.0.44 flowid 1:13

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/