use of tc and cbq for queing discipline
hi all,
i'm new to the list and didn't have time to lurk so please be gentle...(have googled extensively though..)
i have a linux router natting public IP(eth0) to pvt IP(eth1) range. i need to limit the bandwidth(rate) on pub(eth0) so that eth0 uses only 32K and have tried as follows :
tc qdisc add dev eth0 root handle 1: cbq bandwidth 10Mbit allot 1514 cell 8 avpkt 1000 mpu 64
and :
tc class add dev eth0 parent 1:0 classid 1:0 cbq bandwidth 10Mbit \
rate 32Kbit weight 3Kbit prio 5 allot 1514 cell 8 maxburst 20 \
avpkt 1000 mpu 64tc -s -d class show dev eth0 gives :
class cbq 1: root rate 10Mbit cell 8b mpu 64b (bounded,isolated) prio no-transmit/8 weight 10Mbit allot 1514b
level 1 ewma 5 avpkt 1000b maxidle 23us
Sent 839072 bytes 1898 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 32Kbit cell 8b mpu 64b prio 5/5 weight 3Kbit allot 1514b
level 0 ewma 5 avpkt 1000b maxidle 215869us
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 5.65889e+06 undertime 0
It still doesn't limit the bandwidth (rate)
please tell me what i'm doing wrong ?
thanks in advance,
andre
Signature · 7 lines
+27 834433455 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 34 lines · On Sunday 10 March 2002 18:37, [email protected] wrote:
hi all,
i'm new to the list and didn't have time to lurk so please be gentle...(have googled extensively though..)
i have a linux router natting public IP(eth0) to pvt IP(eth1) range. i need to limit the bandwidth(rate) on pub(eth0) so that eth0 uses only 32K and have tried as follows :
tc qdisc add dev eth0 root handle 1: cbq bandwidth 10Mbit allot 1514 cell 8 avpkt 1000 mpu 64
and :
tc class add dev eth0 parent 1:0 classid 1:0 cbq bandwidth 10Mbit \
rate 32Kbit weight 3Kbit prio 5 allot 1514 cell 8 maxburst 20 \ avpkt 1000 mpu 64tc -s -d class show dev eth0 gives :
class cbq 1: root rate 10Mbit cell 8b mpu 64b (bounded,isolated) prio no-transmit/8 weight 10Mbit allot 1514b
level 1 ewma 5 avpkt 1000b maxidle 23us
Sent 839072 bytes 1898 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 624 undertime 0
class cbq 1:1 parent 1: rate 32Kbit cell 8b mpu 64b prio 5/5 weight 3Kbit allot 1514b
level 0 ewma 5 avpkt 1000b maxidle 215869us
Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
borrowed 0 overactions 0 avgidle 5.65889e+06 undertime 0
Quoted 3 lines
It still doesn't limit the bandwidth (rate)
please tell me what i'm doing wrong ?
You created a class, but you didn't put any traffic in it. You can see the counters on the qdisc, so the qdisc contains all trafffic. But the counters of class are zero.
You can do this with filters. They are described in the lartc HOWTO. If you want to limit all traffic, you can use the TBF qdisc. But this means all traffic is limited.
Stef
Signature · 6 lines
[email protected] More QOS info : http://www.docum.org/ Title : "Using Linux as bandwidth manager" _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/