NAT statistics
Hi,
I want to be able to get statistics per IP address for both incoming and outgoing traffic on a NAT server using iptables and kernel v2.4.18. I actually have the same problem for a server running kernel v2.2.20, using ipchains.. Can anyone help me?
Regards,
Sebastian
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello,
See the -v option in man iptables
-v, --verbose
Verbose output. This option makes the list command show the interface address, the rule options (if any), and the TOS masks. The packet and byte coun ters are also listed, with the suffix 'K', 'M' or 'G' for 1000, 1,000,000 and 1,000,000,000 multipli ers respectively (but see the -x flag to change
this). For appending, insertion, deletion and
replacement, this causes detailed information on the rule or rules to be printed.
This would give you the amount of data transferred for each rule that you have in ur firewall as one of the columns
I wrote a small script to extract amount of data for each client I am allowing FORWARD. The script takes the IP address of the machine you wanna find info about as the command line parameter.
------------------------------------------------
#!/bin/sh
details=/sbin/iptables -L -v -n | grep ACCEPT | grep -v INPUT | grep -v OUTPUT | tr -s " " | grep $1 | cut -d" " -f 3,9,12
bytes=echo $details | cut -d" " -f1
ip=echo $details | cut -d" " -f2
echo "IP address $ip transferred $bytes bytes."
------------------------------------------------
The cut thingi's are customised to the output I get for my rules. Check urs and modify.
VaibhaV
Quoted 11 lines · On Thu, 14 Mar 2002 11:30:01 +0200 (EET) "Sebastian Taralunga" <[email protected]>…
Hi,
I want to be able to get statistics per IP address for both incoming and outgoing traffic on a NAT server using iptables and kernel v2.4.18. I actually have the same problem for a server running kernel v2.2.20, using ipchains.. Can anyone help me?
Regards,
Sebastian
\ \
\------------------------------------------------------------------\
\ |VaibhaV Sharma | [email protected] | L I N U X \ | \ |Exocore Consulting | http://www.exocore.com | \ | \|Bangalore, India | +91(80)3440397,3341137 | R O C K S \|
\-----------------------------------------------------------------/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Thank you VaibhaV,
Your script works just fine however my problem is to get traffic information about both downlink and uplink on a NAT server. Do you know what iptables rules should I use to be able to see such information? Right now my rules look like this (generated by iptables-save):
*nat
:PREROUTING ACCEPT [1372:944647]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A POSTROUTING -s 192.168.130.2 -j MASQUERADE
-A POSTROUTING -s 192.168.130.3 -j MASQUERADE
-----
Regards,
Sebastian
Quoted 60 lines · VaibhaV Sharma
Hello,
See the -v option in man iptables-v, --verbose
Verbose output. This option makes the list command show the interface address, the rule options (if any), and the TOS masks. The packet and byte coun ters are also listed, with the suffix 'K', 'M' or 'G' for 1000, 1,000,000 and 1,000,000,000 multipli ers respectively (but see the -x flag to change
this). For appending, insertion, deletion and
replacement, this causes detailed information on the rule or rules to be printed.This would give you the amount of data transferred for each rule that you have in ur firewall as one of the columns
I wrote a small script to extract amount of data for each client I am allowing FORWARD. The script takes the IP address of the machine you wanna find info about as the command line parameter.
------------------------------------------------
#!/bin/shdetails=
/sbin/iptables -L -v -n | grep ACCEPT | grep -v INPUT | grep -v OUTPUT | tr -s " " | grep $1 | cut -d" " -f 3,9,12bytes=
echo $details | cut -d" " -f1
ip=echo $details | cut -d" " -f2echo "IP address $ip transferred $bytes bytes."
------------------------------------------------
The cut thingi's are customised to the output I get for my rules. Check urs and modify.
VaibhaV
Quoted 11 lines · On Thu, 14 Mar 2002 11:30:01 +0200 (EET) "Sebastian Taralunga" <[email protected]>…
Hi,
I want to be able to get statistics per IP address for both incoming and outgoing traffic on a NAT server using iptables and kernel v2.4.18. I actually have the same problem for a server running kernel v2.2.20, using ipchains.. Can anyone help me?
Regards,
Sebastian
\ \
\------------------------------------------------------------------\
Quoted 8 lines
\ |VaibhaV Sharma | [email protected] | L I N U X \ | \ |Exocore Consulting | http://www.exocore.com | \ | \|Bangalore, India | +91(80)3440397,3341137 | R O C K S \|\-----------------------------------------------------------------/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hello,
you can use the ipac-ng (http://sourceforge.net/projects/ipac-ng/) toolset to implement counters with iptables. ipac-ng generates iptables-rulesjust for accounting, this data can be
summarized and even be graphed. ( i use mrtg for graphing the data, but
ipac-ng includes a graph-generator itself)
i hope that's what you were looking for
Tobias
Quoted 92 lines · Sebastian Taralunga
Thank you VaibhaV,
Your script works just fine however my problem is to get traffic information about both downlink and uplink on a NAT server. Do you know what iptables rules should I use to be able to see such information? Right now my rules look like this (generated by iptables-save):
*nat
:PREROUTING ACCEPT [1372:944647]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0](quoted diff) +0
-3-A POSTROUTING -s 192.168.130.2 -j MASQUERADE -A POSTROUTING -s 192.168.130.3 -j MASQUERADE -----Regards,
Sebastian
Quoted 60 lines · VaibhaV Sharma
Hello,
See the -v option in man iptables-v, --verbose
Verbose output. This option makes the list command show the interface address, the rule options (if any), and the TOS masks. The packet and byte coun ters are also listed, with the suffix 'K', 'M' or 'G' for 1000, 1,000,000 and 1,000,000,000 multipli ers respectively (but see the -x flag to change
this). For appending, insertion, deletion and
replacement, this causes detailed information on the rule or rules to be printed.This would give you the amount of data transferred for each rule that you have in ur firewall as one of the columns
I wrote a small script to extract amount of data for each client I am allowing FORWARD. The script takes the IP address of the machine you wanna find info about as the command line parameter.
------------------------------------------------
#!/bin/shdetails=
/sbin/iptables -L -v -n | grep ACCEPT | grep -v INPUT | grep -v OUTPUT | tr -s " " | grep $1 | cut -d" " -f 3,9,12bytes=
echo $details | cut -d" " -f1
ip=echo $details | cut -d" " -f2echo "IP address $ip transferred $bytes bytes."
------------------------------------------------
The cut thingi's are customised to the output I get for my rules. Check urs and modify.
VaibhaV
Quoted 11 lines · On Thu, 14 Mar 2002 11:30:01 +0200 (EET) "Sebastian Taralunga" <[email protected]>…
Hi,
I want to be able to get statistics per IP address for both incoming and outgoing traffic on a NAT server using iptables and kernel v2.4.18. I actually have the same problem for a server running kernel v2.2.20, using ipchains.. Can anyone help me?
Regards,
Sebastian
\ \
\------------------------------------------------------------------\Quoted 8 lines
\ |VaibhaV Sharma | [email protected] | L I N U X \ | \ |Exocore Consulting | http://www.exocore.com | \ | \|Bangalore, India | +91(80)3440397,3341137 | R O C K S \|\-----------------------------------------------------------------/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I don't know if this is the "proper" way to go about doing this, but here is one way you could get it done with ip rule and realms. This requires the iproute2 package to be installed, and all of the pretty policy routing options enabled in the kernel. This would only be practical for a small number of addresses, but it looks like you only have 2 so I don't think it will be a big deal.
1) edit /etc/iproute2/rt_realms, and add an entry for each ip address you want to monitor. The format is:
<number> <realmname>
so:
1 host1
2 host2
2) Then add rules to match the packets to realms.
/sbin/ip rule add from 192.168.130.2/32 lookup table main realms host1(the realm name)/sbin/ip rule add from 192.168.130.3/32 lookup table main realms host2
This will assign the traffic from specific hosts to your realms for accounting, while still looking up the main routing table. After this is done, just type rtacct to to see the breakdown of packets on each realm(hence address) by to/from in bytes and number of packets. This may not be the way you were looking for, but hey...it works and it's fun. Hope this helps.
******************
Tom Steele
Comm/Systems Engineer
Children's Hospital
Omaha, NE
[email protected]
-----Original Message-----
From: Sebastian Taralunga [mailto:[email protected]]
Sent: Thursday, March 14, 2002 7:43 AM
To: VaibhaV Sharma
Cc: [email protected]
Subject: Re: [LARTC] NAT statistics
Thank you VaibhaV,
Your script works just fine however my problem is to get traffic information about both downlink and uplink on a NAT server. Do you know what iptables rules
should I use to be able to see such information? Right now my rules look like
this (generated by iptables-save):
*nat
:PREROUTING ACCEPT [1372:944647]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A POSTROUTING -s 192.168.130.2 -j MASQUERADE
-A POSTROUTING -s 192.168.130.3 -j MASQUERADE
-----
Regards,
Sebastian
Quoted 60 lines · VaibhaV Sharma
Hello,
See the -v option in man iptables-v, --verbose
Verbose output. This option makes the list command show the interface address, the rule options (if any), and the TOS masks. The packet and byte coun ters are also listed, with the suffix 'K', 'M' or 'G' for 1000, 1,000,000 and 1,000,000,000 multipli ers respectively (but see the -x flag to change
this). For appending, insertion, deletion and
replacement, this causes detailed information on the rule or rules to be printed.This would give you the amount of data transferred for each rule that you have in ur firewall as one of the columns
I wrote a small script to extract amount of data for each client I am allowing FORWARD. The script takes the IP address of the machine you wanna find info about as the command line parameter.
------------------------------------------------
#!/bin/shdetails=
/sbin/iptables -L -v -n | grep ACCEPT | grep -v INPUT | grep -v OUTPUT | tr -s " " | grep $1 | cut -d" " -f 3,9,12bytes=
echo $details | cut -d" " -f1
ip=echo $details | cut -d" " -f2echo "IP address $ip transferred $bytes bytes."
------------------------------------------------
The cut thingi's are customised to the output I get for my rules. Check urs and modify.
VaibhaV
Quoted 11 lines · On Thu, 14 Mar 2002 11:30:01 +0200 (EET) "Sebastian Taralunga" <[email protected]>…
Hi,
I want to be able to get statistics per IP address for both incoming and outgoing traffic on a NAT server using iptables and kernel v2.4.18. I actually have the same problem for a server running kernel v2.2.20, using ipchains.. Can anyone help me?
Regards,
Sebastian
\ \
\------------------------------------------------------------------\
Quoted 8 lines
\ |VaibhaV Sharma | [email protected] | L I N U X \ | \ |Exocore Consulting | http://www.exocore.com | \ | \|Bangalore, India | +91(80)3440397,3341137 | R O C K S \|\-----------------------------------------------------------------/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines
2) Then add rules to match the packets to realms.
/sbin/iprule add from 192.168.130.2/32 lookup table main realms host1(the
realm name)
Quoted 1 line
/sbin/iprule add from 192.168.130.3/32 lookup table main realms host2
Oops...sorry, little bit of wrong syntax on ip rule. It should be either table main, or lookup main..both are valid. So it should be:
ip rule add from 192.168.130.2/32 lookup main realms host1
******************
Tom Steele
Comm/Systems Engineer
Children's Hospital
Omaha, NE
[email protected]
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Well,
iptables accounting thingi would give you bytes transferred only for the rules that you have in your firewall. Its a cruddy way of doing things, but if you want both incoming and outgoing traffic logging, put in dummy rules for incoming and outgoing traffic on a per IP basis.
e.g. just giving you an example, by default, all incoming packets are set to ACCEPT in the INPUT chain. If you wanna know how much traffic is coming from your clients to your machine, put in INPUT ACCEPT rules for each machine. You'll now get bytes transferred for these rules. Extract the info and use.
This would get cruddy if you have tons of machines sitting behind your firewall. Better way to do is to use some network sniffing tool which can generate stats, which ofcourse is not in the scope of discussions of this list.
I dunno if there is a better way of doing this using iptables. Maybe someone else can shed some light on this.
VaibhaV
Quoted 17 lines · On Thu, 14 Mar 2002 15:43:09 +0200 (EET) "Sebastian Taralunga" <[email protected]>…
Thank you VaibhaV,
Your script works just fine however my problem is to get traffic information about both downlink and uplink on a NAT server. Do you know what iptables rules should I use to be able to see such information? Right now my rules look like this (generated by iptables-save):
*nat
:PREROUTING ACCEPT [1372:944647]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0](quoted diff) +0
-3-A POSTROUTING -s 192.168.130.2 -j MASQUERADE -A POSTROUTING -s 192.168.130.3 -j MASQUERADE -----
Quoted 74 lines
Regards,
Sebastian
Quoted 68 lines · VaibhaV Sharma
Hello,
See the -v option in man iptables-v, --verbose
Verbose output. This option makes the list command show the interface address, the rule options (if any), and the TOS masks. The packet and byte coun ters are also listed, with the suffix 'K', 'M' or 'G' for 1000, 1,000,000 and 1,000,000,000 multipli ers respectively (but see the -x flag to change
this). For appending, insertion, deletion and
replacement, this causes detailed information on the rule or rules to be printed.This would give you the amount of data transferred for each rule that you have in ur firewall as one of the columns
I wrote a small script to extract amount of data for each client I am allowing FORWARD. The script takes the IP address of the machine you wanna find info about as the command line parameter.
------------------------------------------------
#!/bin/shdetails=
/sbin/iptables -L -v -n | grep ACCEPT | grep -v INPUT | grep -v OUTPUT | tr -s " " | grep $1 | cut -d" " -f 3,9,12bytes=
echo $details | cut -d" " -f1
ip=echo $details | cut -d" " -f2echo "IP address $ip transferred $bytes bytes."
------------------------------------------------
The cut thingi's are customised to the output I get for my rules. Check urs and modify.
VaibhaV
Quoted 11 lines · On Thu, 14 Mar 2002 11:30:01 +0200 (EET) "Sebastian Taralunga" <[email protected]>…
Hi,
I want to be able to get statistics per IP address for both incoming and outgoing traffic on a NAT server using iptables and kernel v2.4.18. I actually have the same problem for a server running kernel v2.2.20, using ipchains.. Can anyone help me?
Regards,
Sebastian
\ \
\------------------------------------------------------------------\\ |VaibhaV Sharma | [email protected] | L I N U X \ | \ |Exocore Consulting | http://www.exocore.com | \ | \|Bangalore, India | +91(80)3440397,3341137 | R O C K S \|\-----------------------------------------------------------------/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
\ \
\------------------------------------------------------------------\
\ |VaibhaV Sharma | [email protected] | L I N U X \ | \ |Exocore Consulting | http://www.exocore.com | \ | \|Bangalore, India | +91(80)3440397,3341137 | R O C K S \|
\-----------------------------------------------------------------/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/