Capturing incoming packets
I am investigating how to capture some packets from a network device (In order to send them to IMQ).
Looking at the kernel compilation options, I see it would be possible to pick some packets and send them to a "netlink device".
What I don't know is how to use this netlink device, and what is it exactly, because the doc say it is going to disappear, and that we must use "netlink sockets"
Help?
Here some interesting info:
using CONFIG_IP_NF_QUEUE in the 2.4 Kernel:
CONFIG_IP_NF_QUEUE:
Netfilter has the ability to queue packets to user space: the netlink device can be used to access them using this driver.
If you want to compile it as a module, say M here and read Documentation/modules.txt. If unsure, say `N'.
net/ipv4/netfilter/ip_queue.c :
/*
* This is a module which is used for queueing IPv4 packets and
* communicating with userspace via netlink.
*
* (C) 2000 James Morris, this code is GPL.
*
* 2000-03-27: Simplified code (thanks to Andi Kleen for clues).
* 2000-05-20: Fixed notifier problems (following Miguel Freitas' report).
* 2000-06-19: Fixed so nfmark is copied to metadata (reported by Sebastian
* Zander).
* 2000-08-01: Added Nick Williams' MAC support.
*
man iptables:
TARGETS
A firewall rule specifies criteria for a packet, and a
target. If the packet does not match, the next rule in
the chain is the examined; if it does match, then the next rule is specified by the value of the target, which can be the name of a user-defined chain or one of the special values ACCEPT, DROP, QUEUE, or RETURN.
ACCEPT means to let the packet through. DROP means to drop the packet on the floor. QUEUE means to pass the packet to userspace (if supported by the kernel).
Signature · 16 lines
__o
_ \<_
(_)/(_)
Saludos de Julián
EA4ACL
-.-
Foro Wireless Madrid
http://opennetworks.rg3.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/if you r trying to capture packets and want some analysis, do use KDE based tool KSnuffle. it is downloadable from
www.quaking.demon.co.uk/ksnuffle.html
hope u will find it intersting
Riaz Mahmood
Quoted 79 lines
From: Julián Muñoz <[email protected]>
To: <[email protected]>
Subject: [LARTC] Capturing incoming packets
Date: Fri, 22 Mar 2002 12:39:56 +0000 (GMT)I am investigating how to capture some packets from a network device (In order to send them to IMQ).
Looking at the kernel compilation options, I see it would be possible to pick some packets and send them to a "netlink device".
What I don't know is how to use this netlink device, and what is it exactly, because the doc say it is going to disappear, and that we must use "netlink sockets"
Help?
Here some interesting info:
using
CONFIG_IP_NF_QUEUEin the 2.4 Kernel:
CONFIG_IP_NF_QUEUE:Netfilter has the ability to queue packets to user space: the netlink device can be used to access them using this driver.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
net/ipv4/netfilter/ip_queue.c:/*
* This is a module which is used for queueing IPv4 packets and
* communicating with userspace via netlink.
*
* (C) 2000 James Morris, this code is GPL.
*
* 2000-03-27: Simplified code (thanks to Andi Kleen for clues).
* 2000-05-20: Fixed notifier problems (following Miguel Freitas' report).
* 2000-06-19: Fixed so nfmark is copied to metadata (reported by
Sebastian
* Zander).
* 2000-08-01: Added Nick Williams' MAC support.
*man iptables:
TARGETS
A firewall rule specifies criteria for a packet, and a
target. If the packet does not match, the next rule in
the chain is the examined; if it does match, then the next rule is specified by the value of the target, which can be the name of a user-defined chain or one of the special values ACCEPT, DROP, QUEUE, or RETURN.ACCEPT means to let the packet through. DROP means to drop the packet on the floor. QUEUE means to pass the packet to userspace (if supported by the kernel).
--
__o _ \<_(_)/(_)
Saludos de Julián
EA4ACL
-.-
Quoted 8 lines
Foro Wireless Madrid
http://opennetworks.rg3.net_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Well, I didn't want to capture packets for analyse, but for enqueuing them in another device,
but thanks, I also searched something better that tcpdump !!!!! :-)
:-))
Quoted 109 lines · Riaz Mahmood
if you r trying to capture packets and want some analysis, do use KDE based tool KSnuffle. it is downloadable from
www.quaking.demon.co.uk/ksnuffle.html
hope u will find it intersting
Riaz Mahmood
Quoted 79 lines
From: Julián Muñoz <[email protected]>
To: <[email protected]>
Subject: [LARTC] Capturing incoming packets
Date: Fri, 22 Mar 2002 12:39:56 +0000 (GMT)I am investigating how to capture some packets from a network device (In order to send them to IMQ).
Looking at the kernel compilation options, I see it would be possible to pick some packets and send them to a "netlink device".
What I don't know is how to use this netlink device, and what is it exactly, because the doc say it is going to disappear, and that we must use "netlink sockets"
Help?
Here some interesting info:
using
CONFIG_IP_NF_QUEUEin the 2.4 Kernel:
CONFIG_IP_NF_QUEUE:Netfilter has the ability to queue packets to user space: the netlink device can be used to access them using this driver.
If you want to compile it as a module, say M here and read
Documentation/modules.txt. If unsure, say `N'.
net/ipv4/netfilter/ip_queue.c:/*
* This is a module which is used for queueing IPv4 packets and
* communicating with userspace via netlink.
*
* (C) 2000 James Morris, this code is GPL.
*
* 2000-03-27: Simplified code (thanks to Andi Kleen for clues).
* 2000-05-20: Fixed notifier problems (following Miguel Freitas' report).
* 2000-06-19: Fixed so nfmark is copied to metadata (reported by
Sebastian
* Zander).
* 2000-08-01: Added Nick Williams' MAC support.
*man iptables:
TARGETS
A firewall rule specifies criteria for a packet, and a
target. If the packet does not match, the next rule in
the chain is the examined; if it does match, then the next rule is specified by the value of the target, which can be the name of a user-defined chain or one of the special values ACCEPT, DROP, QUEUE, or RETURN.ACCEPT means to let the packet through. DROP means to drop the packet on the floor. QUEUE means to pass the packet to userspace (if supported by the kernel).
--
__o _ \<_(_)/(_)
Saludos de Julián
EA4ACL
-.-Quoted 8 lines
Foro Wireless Madrid
http://opennetworks.rg3.net_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 15 lines
__o
_ \<_
(_)/(_)
Saludos de Julián
EA4ACL
-.-
Foro Wireless Madrid
http://opennetworks.rg3.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/