Simple example of bandwidth management
Hi all,
I tried to configure a simple script like this:
*************************************************
#!/bin/bash
SORG.0.0.33
DEST.0.0.34
ipchains -F
ipchains -A output -s $SORG -d $DEST -j ACCEPT -m 1
tc qdisc del dev eth0 root handle 1:0 cbq bandwidth 33600bps avpkt 1000 tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 33600bps avpkt 1000
tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 33600bps rate 10000bps allot 1514 maxburst 20 avpkt 1000 prio 3
tc filter add dev eth0 protocol ip parent 1:0 prio 1 handle 1 fw classid 1:1
********************************************************
My problem is that I cannot see any bandwidth reduction, I download from 10.0.0.33 to 10.0.0.34 with same speed as before (normal ethernet speed). Maybe there exists some file under /proc fs to modify?
Some other debug info:
*******************************************************
[root@adsl bin]# tc -d qdisc show dev eth0
qdisc cbq 1: rate 33600bps cell 8b (bounded,isolated) prio no-transmit/8 weight 33600bps allot 1514b
level 1 ewma 5 avpkt 1000b maxidle 928us
[root@adsl bin]#
[root@adsl bin]#
[root@adsl bin]#
[root@adsl bin]# tc -d class show dev eth0
class cbq 1: root rate 33600bps cell 8b (bounded,isolated) prio no-transmit/8 weight 33600bps allot 1514b
level 1 ewma 5 avpkt 1000b maxidle 928us
class cbq 1:1 parent 1: rate 10000bps cell 8b prio 3/3 weight 10000bps allot 1514b
level 0 ewma 5 avpkt 1000b maxidle 62298us
[root@adsl bin]#
[root@adsl bin]#
[root@adsl bin]#
[root@adsl bin]#
[root@adsl bin]#
[root@adsl bin]# tc filter show dev eth0
filter parent 1: protocol ip pref 1 fw
filter parent 1: protocol ip pref 1 fw handle 0x1 classid 1:1
***************************************************************
My system is:
RedHat 7.2 with kernel 2.4.7-10 on Intel Celeron 300MHz - 128 MB ram Please let me know what I'm wronging...
Thank you for your great support.
Regards
Roberto Arcomano
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line
tc qdisc del dev eth0 root handle 1:0 cbq bandwidth 33600bps avpkt 1000
tc qdisc del dev eth0 root will also work
Quoted 11 lines
tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 33600bps avpkt 1000
tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 33600bps rate 10000bps allot 1514 maxburst 20 avpkt 1000 prio 3
tc filter add dev eth0 protocol ip parent 1:0 prio 1 handle 1 fw classid 1:1 ********************************************************
My problem is that I cannot see any bandwidth reduction, I download from 10.0.0.33 to 10.0.0.34 with same speed as before (normal ethernet speed). Maybe there exists some file under /proc fs to modify?
Bandwidth in each command = ethernet bandwidth. And make the class bounded if you want to bound it :)
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/