Skip to contentSkip to conversation

policy-based routing-help

LARTC Suresh 1 participant 2 messages Mar 29, 2002

lore
Share & tools
lore

Suresh

author
#0 lore raw

Hello All,

I have a linux box with advanced routing enabled.

I have two NIC one connected to LAN and another connected to two different ISPs router.
Even in LAN interface i have two ip address that get packet from two different network.

LAN1 has ip address in 172.16.1.0/32 and LAN2 has ipaddress in 172.16.5.0/32 so i asigned 172.16.1.1 and aliase as 172.16.5.1 in linux box LAN interface and in internet interface 10.3.3.5 and aliase as 192.1.157.34.

I want LAN1 users go through 10.3.3.5 and LAN2 user go through 192.1.157.34

I set default gw as 10.3.3.6 in eth1.

and policy route as
echo 200 suresh >> /etc/iproute2/rt_tables
ip rule add from 172.16.1.0/32 table suresh
ip rule ls

0:      from all lookup local
32765:  from 172.16.1.0/32 lookup suresh
32766:  from all lookup main
32767:  from all lookup default

ip route add default via 192.1.157.35 dev eth1 table suresh ip route flush cache

My problem i can communicate from LAN2 but i can not communicate from LAN1 where i set policy routing.

Do i need some more configuration in Advanced routing and Should i need to use iptables for masquerading

Thanks
Suresh

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#1 lore raw

Hello All,

I have a linux box with advanced routing enabled.

I have two NIC one connected to LAN and another connected to two different ISPs router.
Even in LAN interface i have two ip address that get packet from two different network.

LAN1 has ip address in 172.16.1.0/32 and LAN2 has ipaddress in 172.16.5.0/32 so i asigned 172.16.1.1 and aliase as 172.16.5.1 in linux box LAN interface and in internet interface 10.3.3.5 and aliase as 192.1.157.34.

I want LAN1 users go through 10.3.3.5 and LAN2 user go through 192.1.157.34

I set default gw as 10.3.3.6 in eth1.

and policy route as
echo 200 suresh >> /etc/iproute2/rt_tables
ip rule add from 172.16.1.0/32 table suresh
ip rule ls

0:      from all lookup local
32765:  from 172.16.1.0/32 lookup suresh
32766:  from all lookup main
32767:  from all lookup default

ip route add default via 192.1.157.35 dev eth1 table suresh ip route flush cache

My problem i can communicate from LAN2 but i can not communicate from LAN1 where i set policy routing.

Do i need some more configuration in Advanced routing and Should i need to use iptables for masquerading

Thanks
Suresh

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/