Hosting script
Quoted 6 lines · Charles Williams
Hey all,
I am working on a hosting script to monitor and limit the bandwidth usage on incoming and outgoing connections. I have the initial "beta" of the script complete and would like for some critique on it. Is it ok if I post it to the list and if not just contact me and I will send it to you.
It's ok for me, or you can provide an url.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines
my first try at Linux based QoS:
http://www.slydder.homelinux.com/stories/op/storiesView/sid/77/
remark 1 : you add 4 time a root qdisc to the same interface (eth4). remark 2 : you suppose everyone has 100Mbit NIC's
remark 3 : weight 1 is very low for the classes
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line
Quoted 1 line
remark 3 : weight 1 is very low for the classes
Calculate the weight from the rate : weight = rate / 10.
But what do you want to do with the scipt? There is already a cbq-script configuration : http://freshmeat.net/projects/cbq.init/
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 1 line
Also, is the formula meant for Kbit or Mbit rates? I would imagine Mbit.
Doesn't matter. Just make sure that the rates and the weights are in the same proportion. So weight = rate / 10 is an easy way to do so.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hey all,
I am working on a hosting script to monitor and limit the bandwidth usage on incoming and outgoing connections. I have the initial "beta" of the script complete and would like for some critique on it. Is it ok if I post it to the list and if not just contact me and I will send it to you.
Also, be advised that this is my first attempt at this so be nice. ;)
thanks,
chuck
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Charles Williams" <[email protected]>; <[email protected]>
Sent: Saturday, January 05, 1980 2:45 AM
Subject: Re: [LARTC] Hosting script
Quoted 5 lines · Charles Williams
Hey all,
I am working on a hosting script to monitor and limit the bandwidth usage on incoming and outgoing connections. I have the initial "beta" of the script complete and would like for some critique on it. Is it ok if I
post
Quoted 1 line
it to the list and if not just contact me and I will send it to you.
It's ok for me, or you can provide an url.
Stef
OK everybody,
my first try at Linux based QoS:
http://www.slydder.homelinux.com/stories/op/storiesView/sid/77/
thanks,
chuck
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Charles Williams" <[email protected]>; <[email protected]>
Sent: Saturday, January 05, 1980 4:14 AM
Subject: Re: [LARTC] Hosting script
Quoted 3 lines
Quoted 2 lines
my first try at Linux based QoS:
http://www.slydder.homelinux.com/stories/op/storiesView/sid/77/remark 1 : you add 4 time a root qdisc to the same interface (eth4).
Stef,
thanks. totally missed that after the paste. hehe
Quoted 1 line
remark 2 : you suppose everyone has 100Mbit NIC's
no. actually I suppose I have 100Mbit NICs
Quoted 1 line
remark 3 : weight 1 is very low for the classes
What would you suggest? I figured 1 would be safe.
chuck
Quoted 1 line
Stef
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Charles Williams" <[email protected]>; <[email protected]>
Sent: Saturday, January 05, 1980 4:41 AM
Subject: Re: [LARTC] Hosting script
Quoted 7 lines
Quoted 1 line
Quoted 1 line
remark 3 : weight 1 is very low for the classes
Calculate the weight from the rate : weight = rate / 10.
But what do you want to do with the scipt? There is already a cbq-script configuration : http://freshmeat.net/projects/cbq.init/
Stef
Stef,
This is for a hosting company data center (maybe) and will be controlling the entire bandwidth for the 34Mbps line for that section of the data center.
Also, thanks for the link to the script. I'll take a look at it later. I wanted to make sure I had this down without the script before hand though so that I KNOW what's going on.
thanks,
chuck
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
----- Original Message -----
From: "Charles Williams" <[email protected]>
To: "Stef Coene" <[email protected]>; <[email protected]>
Sent: Sunday, March 31, 2002 8:57 PM
Subject: Re: [LARTC] Hosting script
Quoted 11 lines
----- Original Message -----
From: "Stef Coene" <[email protected]>
To: "Charles Williams" <[email protected]>; <[email protected]>
Sent: Saturday, January 05, 1980 4:41 AM
Subject: Re: [LARTC] Hosting scriptQuoted 2 lines
Quoted 1 line
Quoted 1 line
remark 3 : weight 1 is very low for the classes
Calculate the weight from the rate : weight = rate / 10.
Also, is the formula meant for Kbit or Mbit rates? I would imagine Mbit.
chuck
Quoted 6 lines
Quoted 5 lines
But what do you want to do with the scipt? There is already a cbq-script configuration : http://freshmeat.net/projects/cbq.init/
Stef
Quoted 8 lines
Stef,
This is for a hosting company data center (maybe) and will be controlling the entire bandwidth for the 34Mbps line for that section of the data center.
Also, thanks for the link to the script. I'll take a look at it later. I wanted to make sure I had this down without the script before hand though
so
Quoted 10 lines
that I KNOW what's going on.
thanks,
chuck_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/