adding ingress and egress
Hi!
I'm trying to shape my traffic based on the sum of in- and outgoing traffic, but haven't been able to find any hints in the HOWTO.
What I want is, that the sum of in- and outgoing traffic does not exceed a given limit, but that both can borrow traffic. For example when there is no incoming traffic, outgoing traffic may use all bandwidth, but when when there is more incoming traffic, outgoing should stay below a limit. (just like the webserver and smtp example from the CBQ-Chapter, but either with to interfaces or with ingress and egress bounded together)
I was already considering writing a script that checks the current traffic total and then adjusts the numbers in the qdiscs accordingly, but I think it would be better if I could do it with iproute2 alone, but I just can't figure out how.
Any suggestions?
Arvid
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
If you use IMQ you can should be able to send all incoming/outgoing packets to the same egress qdisc.You can use HTB with two classes below root qdisc, one for incoming packets and one for outgoing packets. Just a thought but well worth trying.
There will surly be problems though and some finetuning.
Can he use iptables to separate the incoming/outgoing packets from the IMQ device?
I don't even know if all steps are solvable with routing and filtering... anyone?
/Torgil
Quoted 3 lines
Hi!
I'm trying to shape my traffic based on the sum of in- and outgoing
traffic,
Quoted 4 lines
but haven't been able to find any hints in the HOWTO.
What I want is, that the sum of in- and outgoing traffic does not exceed a given limit, but that both can borrow traffic. For example when there is
no
Quoted 3 lines
incoming traffic, outgoing traffic may use all bandwidth, but when when there is more incoming traffic, outgoing should stay below a limit. (just like the webserver and smtp example from the CBQ-Chapter, but either with
to
Quoted 4 lines
interfaces or with ingress and egress bounded together)
I was already considering writing a script that checks the current traffic total and then adjusts the numbers in the qdiscs accordingly, but I think
it
Quoted 9 lines
would be better if I could do it with iproute2 alone, but I just can't figure out how.
Any suggestions?
Arvid
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/