Skip to contentSkip to conversation

Routing based on source port

LARTC Daniel Ahlberg 2 participants 2 messages Apr 19, 2002

lore
Share & tools
lore
#0 lore raw

Hello,

I have two ISPs connected to my router. Using "ip rule" I can easily divert traffic to the diffrent uplinks. However, "ip rule" only seems to be able to send packets according to their source or destination adress. What I want is to be able to route based on protocol and source port. Is this possible, and how?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 7 lines · Daniel Ahlberg

Hello,

I have two ISPs connected to my router. Using "ip rule" I can easily divert traffic to the diffrent uplinks. However, "ip rule" only seems to be able to send packets according to their source or destination adress. What I want is to be able to route based on protocol and source port. Is this possible, and how?

I think ip rule has a syntax for that; if it doesn't, use iptables or ipchains to attach a mark to packets with certain source or destination port and create a rule that works on that mark.

Regards,

bert

Signature · 6 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/