Skip to contentSkip to conversation

Ultimate Traffic Conditioner

LARTC Jan Coppens 3 participants 4 messages Apr 29, 2002

lore
Share & tools
lore
#0 lore raw

Hi all,

When I try to run the ultimate traffic conditioner (cbq implementation), I get this strange output:

/tc# ./ultimate

/tc# tc filter show dev eth1
filter parent 1: protocol ip pref 10 u32
filter parent 1: protocol ip pref 10 u32 fh 803: ht divisor 1
filter parent 1: protocol ip pref 10 u32 fh 803::800 order 2048 key ht 803 bkt 0 flowid 1:20
match 00000000/00000000 at 16
filter parent 1: protocol ip pref 10 u32 fh 802: ht divisor 1
filter parent 1: protocol ip pref 10 u32 fh 802::800 order 2048 key ht 802 bkt 0 flowid 1:10
match 00060000/00ff0000 at 8
match 05000000/0f00ffc0 at 0
match 00100000/00ff0000 at 32
filter parent 1: protocol ip pref 10 u32 fh 801: ht divisor 1
filter parent 1: protocol ip pref 10 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:10
match 00010000/00ff0000 at 8
filter parent 1: protocol ip pref 10 u32 fh 800: ht divisor 1
filter parent 1: protocol ip pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10
match 00100000/00ff0000 at 0
filter parent 1: protocol ip pref 11 u32
filter parent 1: protocol ip pref 11 u32 fh 803: ht divisor 1
filter parent 1: protocol ip pref 11 u32 fh 803::800 order 2048 key ht 803 bkt 0 flowid 1:20
match 00000000/00000000 at 16
filter parent 1: protocol ip pref 11 u32 fh 802: ht divisor 1
filter parent 1: protocol ip pref 11 u32 fh 802::800 order 2048 key ht 802 bkt 0 flowid 1:10
match 00060000/00ff0000 at 8
match 05000000/0f00ffc0 at 0
match 00100000/00ff0000 at 32
filter parent 1: protocol ip pref 11 u32 fh 801: ht divisor 1
filter parent 1: protocol ip pref 11 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:10
match 00010000/00ff0000 at 8
filter parent 1: protocol ip pref 11 u32 fh 800: ht divisor 1
filter parent 1: protocol ip pref 11 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10
match 00100000/00ff0000 at 0
filter parent 1: protocol ip pref 12 u32
filter parent 1: protocol ip pref 12 u32 fh 803: ht divisor 1
filter parent 1: protocol ip pref 12 u32 fh 803::800 order 2048 key ht 803 bkt 0 flowid 1:20
match 00000000/00000000 at 16
filter parent 1: protocol ip pref 12 u32 fh 802: ht divisor 1
filter parent 1: protocol ip pref 12 u32 fh 802::800 order 2048 key ht 802 bkt 0 flowid 1:10
match 00060000/00ff0000 at 8
match 05000000/0f00ffc0 at 0
match 00100000/00ff0000 at 32
filter parent 1: protocol ip pref 12 u32 fh 801: ht divisor 1
filter parent 1: protocol ip pref 12 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:10
match 00010000/00ff0000 at 8
filter parent 1: protocol ip pref 12 u32 fh 800: ht divisor 1
filter parent 1: protocol ip pref 12 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10
match 00100000/00ff0000 at 0
filter parent 1: protocol ip pref 13 u32
filter parent 1: protocol ip pref 13 u32 fh 803: ht divisor 1
filter parent 1: protocol ip pref 13 u32 fh 803::800 order 2048 key ht 803 bkt 0 flowid 1:20
match 00000000/00000000 at 16
filter parent 1: protocol ip pref 13 u32 fh 802: ht divisor 1
filter parent 1: protocol ip pref 13 u32 fh 802::800 order 2048 key ht 802 bkt 0 flowid 1:10
match 00060000/00ff0000 at 8
match 05000000/0f00ffc0 at 0
match 00100000/00ff0000 at 32
filter parent 1: protocol ip pref 13 u32 fh 801: ht divisor 1
filter parent 1: protocol ip pref 13 u32 fh 801::800 order 2048 key ht 801 bkt 0 flowid 1:10
match 00010000/00ff0000 at 8
filter parent 1: protocol ip pref 13 u32 fh 800: ht divisor 1
filter parent 1: protocol ip pref 13 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:10
match 00100000/00ff0000 at 0
/tc#

As you can see, the script adds way to many u32 filters. I did some testing, and figured out the problem has something to do with the different priorities. when I give each u32 filter the same priority, I get the right number of filters.

Is this output correct? If not, what can be the problem?

thanks,
Jan

---
Jan Coppens
Ghent University - IMEC

Department of Information Technology (INTEC)
Broadband Communication Networks (IBCN)

Sint-Pietersnieuwstraat, 41
B-9000, Gent
Belgium

E-mail: [email protected]
Phone: +32 (0)9 267 35 90
Fax: +32 (0)9 267 35 99

#1 lore raw
Quoted 3 lines · Jan Coppens

Hi all,

When I try to run the ultimate traffic conditioner (cbq implementation), I get this strange output:

This is a bug in 'tc filter show'.

Signature · 6 lines
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Jan Coppens

----- Original Message -----
From: "bert hubert" <[email protected]>
To: "Jan Coppens" <[email protected]>
Cc: <[email protected]>
Sent: Monday, April 29, 2002 11:32 AM
Subject: Re: [LARTC] Ultimate Traffic Conditioner

Quoted 4 lines · Jan Coppens
Quoted 3 lines

Hi all,

When I try to run the ultimate traffic conditioner (cbq implementation),

I get this strange output:

Quoted 2 lines

This is a bug in 'tc filter show'.

Is there a patch?

Jan

Quoted 7 lines

--
http://www.PowerDNS.com Versatile DNS Software & Services
http://www.tk the dot in .tk
http://lartc.org Linux Advanced Routing & Traffic Control HOWTO

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/