Skip to contentSkip to conversation

cbq (root class) rate problem

LARTC Leandro Stasi 1 participant 1 message May 7, 2002

lore
Share & tools
lore
#0 lore raw

From where the cbq classes borrow bandwith? (parent or sibling)

If the parent is rate at 50kbit the leaf classes should not get more bandwith than the parent?

Why does the classes (with root class as parent) borrow bandwith beyond the rate set when cqb is created?

CBQ on 10Mbit Ethernet
2 clasess 25kbit on each
borrow and sharing both

When I create the cqb qdisc it create a root class with the handle 10:0 I set the root class to rate at 50kbit

Then I create to classes whith 10:0 as the parent

Both classes borrow bandwith beyond the 50kbits

tc qdisc add dev eth0 root handle 10:0 cbq bandwidth 10mbit avpkt 1000 cell 8 rate 50kbit

tc class add dev eth0 parent 10:0 classid 10:10 cbq bandwidth 10mbit rate 25kbit allot 1514 cell 8 maxburst 20 avpkt 1000 sharing borrow

tc class add dev eth0 parent 10:0 classid 10:11 cbq bandwidth 10mbit rate 25kbitallot 1514 cell 8 maxburst 20 avpkt 1000 sharing borrow

I did a workaround by creating an extra class with root class as parent and isolated,bounded

But I don't like to have extra classes just becuse I can control root class.

tc qdisc add dev eth0 root handle 10:0 cbq bandwidth 10mbit avpkt 1000 cell 8

tc class add dev eth0 parent 10:0 classid 10:1 cbq bandwidth 10mbit rate 50kbit allot 1514 cell 8 maxburst 20 avpkt 1000 isolated bounded

tc class add dev eth0 parent 10:1 classid 10:10 cbq bandwidth 10mbit rate 25kbit allot 1514 cell 8 maxburst 20 avpkt 1000 sharing borrow

tc class add dev eth0 parent 10:1 classid 10:11 cbq bandwidth 10mbit rate 25kbitallot 1514 cell 8 maxburst 20 avpkt 1000 sharing borrow

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/