monitoring qdisc usage ...
If i want to see the qdisc class usage and borrowing at certain interval in cbq or htb,
what should i do ?
Best regards,
Quoted 1 line
--<Kristiadi Himawan>--<
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines · Kristiadi Himawan
If i want to see the qdisc class usage and borrowing at certain interval in cbq or htb,
what should i do ?
http://home.docum.org/stef.coene/qos/gui/rrd.html
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
is that really gui ? don't you have the console version ? can it show the ip address and each bandwith usage ?
On Wed, 8 May 2002, Stef Coene wrote:
|On Wednesday 08 May 2002 10:23, Kristiadi Himawan wrote: |> If i want to see the qdisc class usage and borrowing at certain interval |> in cbq or htb, |> what should i do ? |http://home.docum.org/stef.coene/qos/gui/rrd.html | |Stef | |--
Best regards,
Quoted 1 line
--<Kristiadi Himawan>--<
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines · Kristiadi Himawan
is that really gui ? don't you have the console version ? can it show the ip address and each bandwith usage ?
There is no GUI. I want to write one, but it's not so easy to do so. So I started witht the easy part and wrote some scripts to process the output of the tc command.
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/