Skip to contentSkip to conversation

htb, class, prio

LARTC Catalin BOIE 3 participants 4 messages May 14, 2002 – Nov 7, 2002

lore
Share & tools
lore
#0 lore raw

Hello!

Seems that whatever I set for prio for a htb class it is always set to 3. Example script:

ifconfig dummy1 up
ifconfig dummy1 200.200.200.200 netmask 255.255.255.248

tc qdisc del dev dummy1 root

tc qdisc add dev dummy1 root handle 2: htb

tc class add dev dummy1 parent 2: classid 2:1 \
htb prio 7 rate 1000bps ceil 2000bps
^^^^^

Dump:

# tc -s -d -r class show dev dummy1
class htb 2:1 root prio 3 rate 1000bps ceil 2000bps burst 1609b/8 mpu 0b
                      ^^^^^
cburst 1619b/8 mpu 0b quantum 100 level 0 buffer [00142000] cbuffer [000a2000]
 Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
 lended: 0 borrowed: 0 giants: 0 injects: 0
 tokens: 1318912 ctokens: 663552

Thanks!

---
Catalin(ux) BOIE
[email protected]
openh323://dino.rdsbv.ro

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 3 lines · Catalin BOIE

Hello!

Seems that whatever I set for prio for a htb class it is always set to 3.

Prio is a number between 0 and 3. Prio's > 3 are set to 3.

Stef

Quoted 33 lines

Example script:

ifconfig dummy1 up
ifconfig dummy1 200.200.200.200 netmask 255.255.255.248

tc qdisc del dev dummy1 root

tc qdisc add dev dummy1 root handle 2: htb

tc class add dev dummy1 parent 2: classid 2:1 \
htb prio 7 rate 1000bps ceil 2000bps
^^^^^

Dump:

# tc -s -d -r class show dev dummy1
class htb 2:1 root prio 3 rate 1000bps ceil 2000bps burst 1609b/8 mpu 0b
                      ^^^^^
cburst 1619b/8 mpu 0b quantum 100 level 0 buffer [00142000] cbuffer
[000a2000] Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
 lended: 0 borrowed: 0 giants: 0 injects: 0
 tokens: 1318912 ctokens: 663552

Thanks!

---
Catalin(ux) BOIE
[email protected]
openh323://dino.rdsbv.ro

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 7 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Catalin BOIE

In the latest HTB the prio number can be increased to 8 or more without sacrifying performance. Probably I will make both depth & prios 8 in default configuration ..
devik

Quoted 44 lines · Stef Coene
Quoted 3 lines · Catalin BOIE

Hello!

Seems that whatever I set for prio for a htb class it is always set to 3.

Prio is a number between 0 and 3. Prio's > 3 are set to 3.

Stef

Quoted 25 lines

Example script:

ifconfig dummy1 up
ifconfig dummy1 200.200.200.200 netmask 255.255.255.248

tc qdisc del dev dummy1 root

tc qdisc add dev dummy1 root handle 2: htb

tc class add dev dummy1 parent 2: classid 2:1 \
htb prio 7 rate 1000bps ceil 2000bps
^^^^^

Dump:

# tc -s -d -r class show dev dummy1
class htb 2:1 root prio 3 rate 1000bps ceil 2000bps burst 1609b/8 mpu 0b
                      ^^^^^
cburst 1619b/8 mpu 0b quantum 100 level 0 buffer [00142000] cbuffer
[000a2000] Sent 0 bytes 0 pkts (dropped 0, overlimits 0)
 lended: 0 borrowed: 0 giants: 0 injects: 0
 tokens: 1318912 ctokens: 663552

Thanks!

Quoted 8 lines

---
Catalin(ux) BOIE
[email protected]
openh323://dino.rdsbv.ro

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

--

Quoted 9 lines

[email protected]
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.openprojects.net
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#3 lore raw
In reply to Catalin BOIE

You can use up to 32 prios (bitmask limitation). But delay and cpu load increases with prio
count as it is searched linerly often.
devik

Quoted 9 lines · Kurt Wagner

Hi Martin,

Quoted 2 lines · Martin Devera

In the latest HTB the prio number can be increased to 8 or more without sacrifying performance.

Hmm, any easy way to change this to more than 8 priorities? I have kind of a obscure setup here, and would need about 20 prios.

Quoted 10 lines

Performace problems should only occur if the 20 bands are active at the same time, right (I think you talk about latency issues, not implementation limitations?)? Would not be the case in my setup.

regards,
Kurt

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/