Help Needed
Hello All,
I need to gather some material on bandwidth management for a VLAN. Can anyone give any pointers on the same or some useful material that i can get on that. Are there any implementations available for the same ?
Thanks in advance,
Rgds,
Vishal Malhan
[LARTC] Help needed
Hi,
I have a Squid proxy connected to the Internet by ADSL which serves a small LAN.
[ ADSL ] -- [(ppp0) PROXY (eth1)] -- [LAN 192.168.0.0/24]
Shaped: (0.0.0.0/0) ---> -------------------------> --> ------------>
Unshaped:
(squid) -----> --> ------------>I've set up traffic shaping using CBQ by IP on eth1. But it shapes ALL the traffic sent over local Ethernet, and I'd like to keep proxy traffic which didn't came from ppp0 unshaped. I marked with iptables everything that comes from ppp0, but I can't get it to work with both filters (by handle and by IP). I don't realise how should I create the structure of classes. Anyway, it might be enough to leave traffic from ports 80 and 3128 unshaped, but how can I do it? I browsed the documentation (and googled) and I couldn't determine:
a) if more than one filter can be attached to a class;
b) if all filters sharing a class are parsed or the first match exits;
c) if all subclasses of a class are parsed or the first match exits.
I know these are simple questions, but as a newbie I'm pretty stuck in here. With answers to a), b) and c) I should be able to configure it by myself. Anyway, a short sample would be appreciated.
Thanks in advance,
Fernando del Valle
P.S.: Please excuse my poor english :(
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re: [LARTC] Help needed
In reply to Vishal Malhani've say you have a iptables/u32 understanding than a cbq/htb or whatever i think..
a) yes
b) its secuentially "readed"...if none match is applyed, you can have a default iptables/u32 rule for example..-s 0/0 -d myip
c) i dont understand the question, maybe somenoe else can help you.
docum.org and lartc.org have plenty of examples
good luck (suerte flaco)
Quoted 28 lines · Fernando del Valle
Hi,
I have a Squid proxy connected to the Internet by ADSL which serves a small LAN.
[ ADSL ] -- [(ppp0) PROXY (eth1)] -- [LAN 192.168.0.0/24] Shaped: (0.0.0.0/0) ---> -------------------------> --> ------------> Unshaped: (squid) -----> --> ------------>I've set up traffic shaping using CBQ by IP on eth1. But it shapes ALL the traffic sent over local Ethernet, and I'd like to keep proxy traffic which didn't came from ppp0 unshaped. I marked with iptables everything that comes from ppp0, but I can't get it to work with both filters (by handle and by IP). I don't realise how should I create the structure of classes. Anyway, it might be enough to leave traffic from ports 80 and 3128 unshaped, but how can I do it? I browsed the documentation (and googled) and I couldn't determine:
a) if more than one filter can be attached to a class;
b) if all filters sharing a class are parsed or the first match exits;
c) if all subclasses of a class are parsed or the first match exits.I know these are simple questions, but as a newbie I'm pretty stuck in here. With answers to a), b) and c) I should be able to configure it by myself. Anyway, a short sample would be appreciated.
Quoted 5 lines
Thanks in advance,
Fernando del Valle
P.S.: Please excuse my poor english :(
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re: [LARTC] Help needed
In reply to Vishal MalhanQuoted 10 lines · Fernando del Valle
Hi,
I have a Squid proxy connected to the Internet by ADSL which serves a small LAN.
[ ADSL ] -- [(ppp0) PROXY (eth1)] -- [LAN 192.168.0.0/24] Shaped: (0.0.0.0/0) ---> -------------------------> --> ------------> Unshaped: (squid) -----> --> ------------>
Quoted 8 lines
I've set up traffic shaping using CBQ by IP on eth1. But it shapes ALL the traffic sent over local Ethernet, and I'd like to keep proxy traffic which didn't came from ppp0 unshaped. I marked with iptables everything that comes from ppp0, but I can't get it to work with both filters (by handle and by IP). I don't realise how should I create the structure of classes. Anyway, it might be enough to leave traffic from ports 80 and 3128 unshaped, but how can I do it? I browsed the documentation (and googled) and I couldn't determine:
So you want proxied traffic unshaped. You can use the source address. All traffic from ip-address = eth1 is local traffic , all other traffic is internet traffic. The only problem is proxy traffic. Because you don't know if the traffic came from ppp0 or it was fetched form the proxy cache. You can mark the packets coming in from ppp0, but the mark is lost when the packet enters the proxy.
Quoted 1 line
a) if more than one filter can be attached to a class;
Yes you can. They are ordered based on prio.
Quoted 1 line
b) if all filters sharing a class are parsed or the first match exits;
As soon as a filter matches, the packet is sended to the destination of the filter.
Quoted 1 line
c) if all subclasses of a class are parsed or the first match exits.
I'm not sure what you want to say. But if a packet enters a class, all filters are tested. If a filter matches, the packet is send to the destination class. And if that class is not a leaf class (it has child classes), the filters attached to that class are tested again. This goes on, untill the packet ends up in a class with not child classes (a leaf class).
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/