Upload rate also down
Problem
without qdisc 100mbit LAN (Sis900 AMD Duron 850 128RAM)-server
Realtek 8139 PIII-450 192RAN-client
I try ftp and ssh(scp)
upload ~7.5Mbyte/s
download ~8.5Mbyte/s
with tbf
tc qdisc add dev eth0 root tbf rate 1mbit burst 10k latency 50ms
download ~124kbyte/s
upload ~1500kbyte/s Why !!! (I try htb - the same problem) if I change 1mbit to 100kbit upload ~150kbyte/s ??? if rate > 4mbit upload ~6.5Mbyte/s
i.e. if rate < 5mbit upload~*download ??????? Any ideas !
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines
without qdisc 100mbit LAN (Sis900 AMD Duron 850 128RAM)-server
Realtek 8139 PIII-450 192RAN-clientI try ftp and ssh(scp)
upload ~7.5Mbyte/s
download ~8.5Mbyte/swith tbf
tc qdisc add dev eth0 root tbf rate 1mbit burst 10k latency 50ms
And where do you execute that command? On the server?
Quoted 2 lines
download ~124kbyte/s
upload ~1500kbyte/s Why !!! (I try htb - the same problem)
You ceil the download to 1Mbit ( = 125 kbyte/s) and use all that bandwidth to download. But when you upload at the same time, there are also packets going in the download direction (confirmation packets and others). But your download is full, so they can't get thru. That's why upload is also slow and that's why you have to shape in both directions.
Or be clever, and give more bandwidth in the download direction for the packets needed for upload
Stef
Signature · 7 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I execute command on the server for shape outgouing data and do not upload at the same time and do not use any ingress police
Quoted 20 lines · Stef Coene
Quoted 8 lines
without qdisc 100mbit LAN (Sis900 AMD Duron 850 128RAM)-server
Realtek 8139 PIII-450 192RAN-clientI try ftp and ssh(scp)
upload ~7.5Mbyte/s
download ~8.5Mbyte/swith tbf
tc qdisc add dev eth0 root tbf rate 1mbit burst 10k latency 50msAnd where do you execute that command? On the server?
Quoted 2 lines
download ~124kbyte/s
upload ~1500kbyte/s Why !!! (I try htb - the same problem)You ceil the download to 1Mbit ( = 125 kbyte/s) and use all that bandwidth to download. But when you upload at the same time, there are also packets going in the download direction (confirmation packets and others). But your download is full, so they can't get thru. That's why upload is also slow and that's why you have to shape in both directions.
Or be clever, and give more bandwidth in the download direction for the packets needed for upload
Quoted 9 lines
Stef
Signature · 4 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I shape only download from server where i use tbf or htb (I don't try cbq red and other ) and i find that the upload speed also down
when I delete qdisc or if the shaping speed > 5mbit/sd0kbyte/s
upload speed up to hardware limit ( in other case upload_speed~10*download_speed download_speed < 2mbit/s furthure upload_speed approach to hardware limit) I don't upload and download at the same time
I understand difference between bit and byte
I understand difference between egress and ingress
But I wonder when I detect it problem
It may be only my problem hardware, software etc.
I try to recompile kernel with patches, without patches and some different combination of it(2.4.18 htb-3.4 patch imq-2.4.18.diff-9 patch
and some of patch-o-matic from iptables-1.2.6a - qouta,multiport,time,ttl,psd ....) but nothing changed
It's impossible that the egress influence on upload speed of any way ??? Thank you for advance !!
(sorry from my English)
Quoted 8 lines · Stef Coene
Quoted 2 lines · Alexey Talikov
I execute command on the server for shape outgouing data and do not upload at the same time and do not use any ingress police
So you shape traffic going from server to the client (download).
Quoted 1 line
Quoted 1 line
Quoted 1 line
tc qdisc add dev eth0 root tbf rate 1mbit burst 10k latency 50ms
Here you limit download to 1 mbit/s = 125 kilobyte/s. And this exaclly what you get :
Quoted 16 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
download ~124kbyte/s
And if you upload something, you only get 1500 kilobyte/s. But is this at the same you are downloading ? Or are you uploading when you are not downloading?
Quoted 1 line
Quoted 1 line
Quoted 1 line
upload ~1500kbyte/s Why !!! (I try htb - the same problem)
Stef
Signature · 4 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
on 20.05.2002 I ask question about Upload rate also down
I think answer is that the TCP protocol issue when i upload to server packets with answer from the server shaping and upload speed also down I'm right ???
-----------------------------------
mailto:[email protected]
BR
Alexey Talikov
FORTEK
-----------------------------------
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/